If any of the following conditions are detected while the cruise control system is controlling vehicle speed, the system clears the vehicle speed stored in the ECM and cancels control of vehicle speed by the cruise control system.
| Auto Cancel Condition | Warning | Fail-safe Deactivation Condition | |||
|---|---|---|---|---|---|
| Multi-information Display | Master Warning Light | Cruise Control Indicator | Warning Buzzer | ||
| Open or short in stop light switch circuit | Cruise Control Malfunction Visit Your Dealer | Illuminates | Does not illuminate | Sounds | Ignition switch is turned off and back to ON again. |
·
Problem with stop light switch input circuit ·
Problem with steering pad switch cancel circuit ·
Malfunction is detected in the vehicle stability control system ·
Communication stop between skid control ECU (master cylinder solenoid) and ECM |
Cruise Control Malfunction Visit Your Dealer | Illuminates | Does not illuminate | Sounds | Ignition switch is turned off and back to ON again. |
| Malfunction in the ECD system | - | Illuminates | Does not illuminate | - | Ignition switch is turned off and back to ON again. |
| If the following condition occurs, the ECM cancels control of vehicle speed by the cruise control system (Stored vehicle speed is maintained):
·
Vehicle speed is less than approximately 30 km/h (20 mph) while driving with the cruise control system controlling vehicle speed |
- | Does not illuminate | Illuminates | - | Cruise control main switch is pressed to -SET or +RES. |
| Vehicle speed is less than stored vehicle speed by approximately 16 km/h (10 mph) or more | - | Does not illuminate | Illuminates | - | Cruise control main switch is pressed to -SET. |
·
VSC operates while driving with cruise control system controlling vehicle speed ·
TRC operates for a certain period of time while driving with cruise control system controlling vehicle speed. ·
TRC is turned off ·
VSC is turned off |
- | Does not illuminate | Illuminates | - | Cruise control main switch is pressed to +RES. |