Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM (except i-ART) › from 2020.08
RM27T0E _51 Engine / Hybrid System _053696 CRUISE CONTROL _0438250 CRUISE CONTROL SYSTEM(except i-ART) D

CRUISE CONTROL  CRUISE CONTROL SYSTEM(except i-ART)  DIAGNOSIS SYSTEM  


DESCRIPTION


The ECM controls the cruise control system of the vehicle. The data and DTCs relating to the cruise control system can be read from the DLC3 of the vehicle. Use the GTS to check and solve the problem.

HINT:

If a vehicle speed sensor, stop light switch assembly or any other related part malfunctions, the ECM cancels cruise control operation automatically.


a.

Check the battery voltage.

Standard voltage:

11 to 14 V


If the voltage is below 11 V, replace or recharge the battery before proceeding to the next step.




CHECK INDICATOR


a.
E300373C02
0.458,0.198 0.771,0.396 0.313,0.198 10 false *a 0.458,1.281 0.771,1.479 0.313,0.198 10 false *b
*a Master Warning Light
*b Multi-information Display


When a malfunction occurs in the cruise control system, the system turns off the cruise control indicator light and the master warning light illuminates at the same time a "pong" sound is heard. Also, "Cruise Control Malfunction Visit Your Dealer" is displayed in the combination meter assembly and the ECM stores DTCs.

NOTICE:
·

When the system returns to normal, the "Cruise Control Malfunction Visit Your Dealer" display in the combination meter assembly disappears.

·

Do not remove any fuses or disconnect any cables from the battery terminals until the data stored in the ECUs is cleared.