CHECK FREEZE FRAME DATA (READ BY GTS)
The ECU data indicating the vehicle status is stored in the ECU as a freeze frame data simultaneously as the DTC is stored.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Powertrain / Cruise Control / Trouble Codes.
From the DTC screen, select the DTC (snow icon displayed) to which freeze frame data is recorded.
LIST OF FREEZE FRAME DATA
| Tester Display | Measurement Item / Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| CCS Vehicle Spd | Vehicle speed / Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph) | Actual vehicle speed displayed | - |
| CCS Mem Vehicle Spd | Vehicle speed / Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph) | Vehicle speed stored in memory | - |
| Cruise Control | Cruise control / ON or OFF | ON: Cruise control set
OFF: Cruise control not set |
- |
| Main SW M-CPU | Cruise control main switch (Main CPU) / ON or OFF | ON: Cruise control main switch on
OFF: Cruise control main switch off |
- |
| CCS Ready M-CPU | Cruise control system standby condition (Main CPU) / ON or OFF | ON: Cruise control main switch on
OFF: Cruise control main switch off |
- |
| CCS Indicator M-CPU | CRUISE main indicator (Main CPU) / ON or OFF | ON: CRUISE main indicator light on
OFF: CRUISE main indicator light off |
- |
| Cancel Switch | CANCEL switch signal / ON or OFF | ON: CANCEL switch on
OFF: CANCEL switch off |
- |
| SET/COAST Switch | -SET switch signal / ON or OFF | ON: -SET switch on
OFF: -SET switch off |
- |
| RES/ACC Switch | +RES switch signal / ON or OFF | ON: +RES switch on
OFF: +RES switch off |
- |
| Stop Light Switch 1 | Stop light switch signal / ON or OFF | ON: Brake pedal depressed
OFF: Brake pedal released |
- |
| Stop Light Switch 2 | Stop light switch signal / ON or OFF | ON: Brake pedal depressed
OFF: Brake pedal released |
- |
| Brake Cancel Switch | Brake cancel signal /ON or OFF | ON: Brake pedal depressed
OFF: Brake pedal released |
- |