ENTER DIAGNOSTIC MODE
Enter diagnostic mode.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR SEAT ENTERTAINMENT SYSTEM>DTC CHECK / CLEAR
COLOR BAR CHECK
Use the rear switch and volume assembly for each inspection.
This mode checks the color display on the television display assembly.
The television display assembly is not a touch panel type display. Do not touch the screen.
Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle.
The television display assembly is not a touch panel type. Do not touch the screen.
Select "Color Bar Check" from the "REAR Check" screen.
Select a color bar from the "Color Bar Check" screen.
Check the display color.
The entire screen turns to the color or stripe selected.
The screen returns to the "Color Bar Check" screen if the rear switch and volume assembly is operated again.
REMOTE CONTROL CHECK
Use the rear switch and volume assembly for each inspection.
The rear switch and volume assembly switches are checked in the following procedure.
The television display assembly is not a touch panel type display. Do not touch the screen.
Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle.
Select "Remote Control Check" from the "REAR Check" screen.
Remote Control Check
Operate each switch and check that the switch name is correctly displayed.
| Display | Content |
|---|---|
| *a: Name of switch being pushed | Name of the pushed switch is displayed |
START SCREEN LANGUAGE
Use the rear switch and volume assembly for each inspection.
The language for the start screen is selected in this procedure.
The television display assembly is not a touch panel type display. Do not touch the screen.
Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle.
Select "Start Screen Language".
Select the language for the start screen.
FINISH DIAGNOSTIC MODE
Turn the ignition switch off.