Home › Engine / Hybrid System › 5L-E (ENGINE MECHANICAL) › TIMING BELT › from 2020.08
RM27T0E _51 Engine / Hybrid System _053661 5L-E ENGINE MECHANICAL _0260481 TIMING BELT A

5L-E ENGINE MECHANICAL  TIMING BELT  REMOVAL  


PROCEDURE

Hide 1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 16711 2.REMOVE FAN SHROUD

a.

Remove the fan shroud (See page Engine / Hybrid System>5L-E (COOLING)>RADIATOR>REMOVAL).


Hide 44319 3.REMOVE VANE PUMP DRIVE PULLEY

A223614

a.

Remove the 4 bolts, vane pump drive pulley and cooler compressor drive pulley.


Hide 13471 4.REMOVE CRANKSHAFT PULLEY

A058720E02
2.627,1.356 2.815,1.573 0.188,0.216 10 *a 2.206,1.841 2.447,2.003 0.242,0.163 10 *b

a.

Using SST, remove the pulley bolt.

SST
09213-54015  (91651-60855)
09330-00021  

Text in Illustration
*a Hold
*b Turn


b.
A058719E03
1.771,1.281 2.042,1.552 false 1.885,1.573 2.188,1.719 0.302,0.146 10 false SST 0.219,0.948 0.552,1.198 0.333,0.25 10 false *a 1.5,1.865 1.688,2.031 0.188,0.167 10 false *b

Using SST, remove the pulley.

SST
09950-50013  (09951-05010, 09952-05010, 09953-05020, 09954-05021)
09950-60010  (09951-00490)
09950-40011  (09957-04010)

Text in Illustration
*a Hold
*b Turn


Hide 88545 5.REMOVE IDLE PULLEY ASSEMBLY

a.
A224977

Remove the 2 bolts and Idle pulley bracket.


Hide 11302 6.REMOVE TIMING BELT COVER

a.
A378616

Remove the 11 bolts, washers, timing belt cover, and 2 gaskets.


Hide 13566A 7.REMOVE TIMING BELT GUIDE

a.

Remove the timing belt guide.


Hide 8.SET NO. 1 CYLINDER TO TDC/COMPRESSION

a.
A374971E01
1.198,1.813 0.594,1.469 true 1.208,1.813 0.625,1.385 true 1.25,1.76 1.563,1.958 0.313,0.198 10 false *1

Using the crankshaft pulley bolt, align the groove of the crankshaft pulley with the timing pointer by turning the crankshaft clockwise.

Text in Illustration
*1 Timing Mark
V100135

Turn


b.
A374972E01
0.708,1.479 0.958,1.406 false 0.688,1.24 0.958,1.396 true 1,1.344 1.313,1.542 0.313,0.198 10 false *1

Check that the timing marks of the camshaft timing pulley and No. 2 timing belt cover are aligned.

Text in Illustration
*1 Timing Mark

If not, turn the crankshaft 1 revolution (360°).


Hide 13568 9.REMOVE TIMING BELT

HINT:

If reusing the timing belt, draw a direction arrow on the timing belt (in the direction the belt move when the engine is running), and place matchmarks on the pulleys and timing belt.


a.
A374973

Turn the crankshaft 90° counterclockwise, and align the timing mark of the crankshaft timing pulley with the protrusion of the timing belt case.

Text in Illustration
V100135

Turn

NOTICE:

If the timing belt is disengaged, having the crankshaft timing pulley at the wrong angle can cause the piston head and valve head to come into contact with each other when removing the camshaft timing pulley, and camshaft causing damage. Therefore, always set the crankshaft pulley is removed at the correct angle.



b.
U169059E01
0.602,1.376 0.735,1.567 0.133,0.191 10 A 0.808,1.475 0.984,1.475 0.984,1.475 1.388,0.934 false

Loosen the No. 1 timing belt idler bolt (A), and shift the idler to the left as far as possible.

Text in Illustration
V100135

Pry
V100136

Move


c.

Tighten the No. 1 timing belt idler bolt (A), and then relieve the timing belt tension.


d.

Remove the timing belt.


Hide 13505 10.REMOVE NO. 1 TIMING BELT IDLER SUB-ASSEMBLY

a.

Remove the 2 bolts (A and B).


b.
A374975E01
1.177,1.75 1.385,1.958 0.208,0.208 10 true A 2.479,1.104 2.688,1.313 0.208,0.208 10 true B 0.667,0.76 0.875,0.969 0.208,0.208 10 true C

Loosen the bolt (C), and remove the No. 1 timing belt idler.