Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM (for Halogen Headlight) › from 2020.08
RM27T0E _59 Vehicle Exterior _053747 LIGHTING (EXT) _0326211 LIGHTING SYSTEM(for Halogen Headlight) W

LIGHTING (EXT)  LIGHTING SYSTEM(for Halogen Headlight)  CUSTOMIZE PARAMETERS  


CUSTOMIZE LIGHTING SYSTEM


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



HINT:

The following items can be customized.


a.

Customizing with the GTS

i.

Connect the GTS to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the GTS on.


iv.

Enter the following menus: Utility / Customize / Light Control.


v.

Select the setting by referring to the table below.

Light Control
Display Default Content Setting Relevant ECU
Response Time*1 Normal Changes the delay timing of lighting the taillights when going into a tunnel when the light control switch is in the Auto position. Normal, Long Main body ECU (multiplex network body ECU)
Disp Ex ON Sen NORMAL Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*A NORMAL, DARK2, DARK1, LIGHT1, LIGHT2 Main body ECU (multiplex network body ECU)
Disp Ex OFF Sen NORMAL Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*B NORMAL, DARK2, DARK1, LIGHT1, LIGHT2 Main body ECU (multiplex network body ECU)
Light Auto OFF Delay*2 30 s Keep the headlights on for a certain period of time after turning the ignition switch off and closing all doors with the low beam headlights on. OFF, 30 s, 60 s, 90 s Main body ECU (multiplex network body ECU)
Sensitivity Normal Adjusts the sensitivity of the automatic light control system.*C Normal, Dark2, Dark1, Light1, Light2 Main body ECU (multiplex network body ECU)
Extended Headlight Lighting*3 30 s Sets the headlight lighting time after the ignition switch is turned off. 30 s, 60 s, 90 s, 120 s Main body ECU (multiplex network body ECU)
Light up Clearance Lights at Door Unlock Function*4 ON Turns on the clearance lights and the taillights for 15 seconds when the doors are unlocked by the entry key or the wireless key. ON, OFF Main body ECU (multiplex network body ECU)

*1: Vehicles displaying the Item "Response Time" on the GTS

*2: Vehicles displaying the Item "Light Auto OFF Delay" on the GTS

*3: w/ Extended Headlight Lighting

*4: w/ Welcome Light Illumination Control


HINT:

The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.


*A

E259624E07
0.375,0.333 2.292,0.708 1.917,0.375 10 Brightness level required to dim the lights 2.771,0.542 3.385,0.74 0.615,0.198 10 Dark 6.281,0.542 6.896,0.74 0.615,0.198 10 Bright 1.083,1.104 1.729,1.333 0.646,0.229 10 Setting 2.667,1.104 3.313,1.333 0.646,0.229 10 DARK2 3.521,1.104 4.167,1.333 0.646,0.229 10 DARK1 4.406,1.104 5.083,1.333 0.677,0.229 10 NORMAL 5.333,1.104 6.01,1.333 0.677,0.229 10 LIGHT1 6.177,1.104 6.76,1.313 0.583,0.208 10 LIGHT2

*B

E259624E08
0.375,0.406 2.396,0.792 2.021,0.385 10 Brightness level required to cancel the dimming of the lights 2.771,0.542 3.385,0.74 0.615,0.198 10 Dark 6.281,0.542 6.896,0.74 0.615,0.198 10 Bright 1.083,1.104 1.729,1.333 0.646,0.229 10 Setting 2.667,1.104 3.313,1.333 0.646,0.229 10 Dark2 3.521,1.104 4.167,1.333 0.646,0.229 10 Dark1 4.406,1.104 5.083,1.333 0.677,0.229 10 Normal 5.333,1.104 6.01,1.333 0.677,0.229 10 Light1 6.177,1.104 6.76,1.313 0.583,0.208 10 Light2

*C

E259624E09
0.406,0.406 2.427,0.792 2.021,0.385 10 Sensitivity of the automatic light control system 2.771,0.542 3.385,0.74 0.615,0.198 10 Dark 6.281,0.542 6.896,0.74 0.615,0.198 10 Bright 1.083,1.104 1.729,1.333 0.646,0.229 10 Setting 2.667,1.104 3.313,1.333 0.646,0.229 10 Dark2 3.521,1.094 4.167,1.323 0.646,0.229 10 Dark1 4.406,1.104 5.083,1.333 0.677,0.229 10 Normal 5.333,1.104 6.01,1.333 0.677,0.229 10 Light1 6.177,1.104 6.76,1.313 0.583,0.208 10 Light2



vi.

Enter the following menus: Utility / Customize / Warning.


vii.

Select the setting by referring to the table below.

Warning
Display Default Content Setting Relevant ECU
Lane Change Flashing Times Setting 3 Function to change the lane change flashing times. OFF, 3, 4, 5, 6, 7 Combination meter assembly



b.

Customizing with the Multi-display

i.

Turn the ignition switch to ON.


ii.

Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Lights Settings.


iii.

Select the setting by referring to the table below.

Lights Settings
Tester Display Description Default Setting ECU
Light Sensor sensitivity Adjusts the sensitivity of the automatic light control system.*A 0 -2, -1, 0, +1 or +2 Main body ECU (multiplex network body ECU)
Headlamps Auto-Off Timer* Keeps the headlights on for a certain period of time after turning the ignition switch off and closing all of doors with the low beam headlights on. 30 sec. Off, 30 sec., 60 sec. or 90 sec. Main body ECU (multiplex network body ECU)

*: Vehicles displaying the Item "Headlamps Auto-Off Timer" on the multi-information display


HINT:

The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.


*A

E259624E05
0.365,0.302 2.354,0.708 1.99,0.406 10 Sensitivity of the automatic light control system 1.104,1.094 2,1.365 0.896,0.271 10 Setting 2.781,0.531 3.333,0.781 0.552,0.25 10 Dark 6.313,0.542 6.865,0.792 0.552,0.25 10 Bright 2.813,1.125 3.365,1.375 0.552,0.25 10 -2 3.708,1.125 4.26,1.375 0.552,0.25 10 -1 4.646,1.125 5.198,1.375 0.552,0.25 10 0 6.375,1.125 6.729,1.323 0.354,0.198 10 +2 5.49,1.125 5.854,1.333 0.365,0.208 10 +1