Home › Power Source / Network › NETWORKING › LIN COMMUNICATION SYSTEM › from 2020.08
RM27T0E _57 Power Source / Network _053729 NETWORKING _0261030 LIN COMMUNICATION SYSTEM U

NETWORKING  LIN COMMUNICATION SYSTEM  TERMINALS OF ECU  


CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND DRIVER SIDE JUNCTION BLOCK ASSEMBLY (for 5L-E)


E373866E02
1.073,3.354 1.479,3.615 0.406,0.26 3.49,3.365 3.896,3.625 0.406,0.26 5.75,3.292 6.156,3.552 0.406,0.26 0.583,4.698 0.99,4.958 0.406,0.26 1.448,4.698 1.854,4.958 0.406,0.26 3.792,4.677 4.198,4.938 0.406,0.26 5.771,4.74 6.177,5 0.406,0.26 4.781,5.948 5.188,6.208 0.406,0.26 1.74,5.938 2.146,6.198 0.406,0.26 3.344,7.219 3.75,7.479 0.406,0.26 1.615,0.625 1.813,0.406 1.813,0.406 2.01,0.406 false 1.625,1.125 1.823,0.906 1.823,0.906 2.021,0.906 true 1.615,1.458 1.813,1.24 1.813,1.24 2.01,1.24 true 1.625,1.844 1.823,1.625 1.823,1.625 2.021,1.625 true 0.938,1.313 0.76,1.104 0.76,1.104 0.573,1.104 true 2.063,0.333 2.375,0.531 0.313,0.198 10 false *1 3.74,0.969 3.896,1.167 0.156,0.198 10 false A 5.875,1.156 6.188,1.354 0.313,0.198 10 false 2D 5.875,1.823 6.188,2.021 0.313,0.198 10 false 2A 2.063,1.552 2.521,1.75 0.458,0.198 10 false G63 2.063,1.167 2.521,1.365 0.458,0.198 10 false G64 2.063,0.823 2.521,1.021 0.458,0.198 10 false G65 1.167,3.406 1.625,3.604 0.458,0.198 10 false G63 3.563,3.406 4.021,3.604 0.458,0.198 10 false G64 5.813,3.344 6.271,3.542 0.458,0.198 10 false G65 1.063,2.375 1.375,2.573 0.313,0.198 10 false 2K 0.917,1.792 1.229,1.99 0.313,0.198 10 false 2F 0.292,1.031 0.646,1.25 0.354,0.219 10 false 2I*A 0.292,1.208 0.646,1.427 0.354,0.219 10 false 2H*B 3.5,7.271 3.656,7.469 0.156,0.198 10 false A 4.885,5.99 5.198,6.188 0.313,0.198 10 false 2A 5.885,4.771 6.198,4.969 0.313,0.198 10 false 2K 3.927,4.708 4.24,4.906 0.313,0.198 10 false 2F 1.865,5.979 2.177,6.177 0.313,0.198 10 false 2D 0.75,4.75 1.063,4.948 0.313,0.198 10 false 2I 1.563,4.74 1.875,4.938 0.313,0.198 10 false 2H 1.042,4.74 1.354,4.938 0.313,0.198 10 false *A 1.927,4.729 2.24,4.927 0.313,0.198 10 false *B

Text in Illustration
*A for LHD *B for RHD
*1 Main body ECU (multiplex network body ECU) - -

a.

Remove the main body ECU (multiplex network body ECU) from the driver side junction block assembly.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G63-3 (GND2) - Body ground W-B - Body ground Ground Always Below 1 Ω
A-11 (GND1) - Body ground None - Body ground Ground Always Below 1 Ω
A-30 (BECU) - Body ground None - Body ground Battery power supply Always 11 to 14 V
A-32 (IG) - Body ground None - Body ground IG power supply Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V



CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND DRIVER SIDE JUNCTION BLOCK ASSEMBLY (excep 5L-E)


E373864C02
3.271,7.844 3.781,8.083 0.51,0.24 4.583,6.177 5.094,6.417 0.51,0.24 1.469,6.177 1.979,6.417 0.51,0.24 1.271,4.677 1.781,4.917 0.51,0.24 3.708,4.469 4.219,4.708 0.51,0.24 5.24,4.469 5.75,4.708 0.51,0.24 6.26,4.448 6.771,4.688 0.51,0.24 5.583,3.094 6.094,3.333 0.51,0.24 3.49,3.083 4,3.323 0.51,0.24 1.271,3.135 1.781,3.375 0.51,0.24 1.271,4.354 1.781,4.594 0.51,0.24 1.604,0.646 1.604,0.417 1.604,0.417 1.76,0.417 false 0.615,1.302 0.948,1.302 true 1.625,1.156 1.958,1.156 true 1.635,1.469 1.969,1.469 true 1.646,1.833 1.979,1.833 true 1.823,0.292 2.135,0.49 0.313,0.198 10 false *1 0.125,0.125 0.51,0.385 0.385,0.26 12 false *A 0.229,1.188 0.615,1.563 0.385,0.375 10 false 2Q*B 2P*C 0.854,1.792 1.24,2.167 0.385,0.375 10 false 2M 0.896,2.229 1.281,2.604 0.385,0.375 10 false 2K 0.917,2.448 1.302,2.823 0.385,0.375 10 false 2L 3.781,0.969 4.167,1.344 0.385,0.375 10 false A 5.844,1.094 6.229,1.469 0.385,0.375 10 false 2N 5.844,1.76 6.229,2.135 0.385,0.375 10 false 2O 3.469,7.875 3.854,8.25 0.385,0.375 10 false A 5.427,4.5 5.813,4.875 0.385,0.375 10 false 2L 6.438,4.49 6.823,4.865 0.385,0.375 10 false 2K 3.854,4.49 4.24,4.865 0.385,0.375 10 false 2M 1.427,4.375 1.813,4.75 0.385,0.375 10 false 2Q 1.438,4.698 1.823,5.073 0.385,0.375 10 false 2P 1.854,4.698 2.24,5.073 0.385,0.375 10 false *C 1.854,4.396 2.24,4.771 0.385,0.375 10 false *B 1.615,6.208 2,6.583 0.385,0.375 10 false 2N 4.74,6.198 5.125,6.573 0.385,0.375 10 false 2O 2.01,1.698 2.552,2 0.542,0.302 10 false G216 1.344,3.156 1.885,3.458 0.542,0.302 10 false G216 2.021,1.031 2.563,1.333 0.542,0.302 10 false G217 5.667,3.115 6.208,3.417 0.542,0.302 10 false G217 3.583,3.104 4.125,3.406 0.542,0.302 10 false G218 2.01,1.354 2.552,1.656 0.542,0.302 10 false G218

Text in Illustration
*A Main Body ECU (Multiplex Network Body ECU) with 3 connectors *B for LHD
*C for RHD - -
*1 Main body ECU (multiplex network body ECU) - -

E373865E02
2.063,3.104 2.583,3.344 0.521,0.24 4.479,3.125 5,3.365 0.521,0.24 5.229,4.615 5.75,4.854 0.521,0.24 6.24,4.604 6.76,4.844 0.521,0.24 3.656,4.615 4.177,4.854 0.521,0.24 1.344,4.656 1.865,4.896 0.521,0.24 1.521,6.177 2.042,6.417 0.521,0.24 4.625,6.198 5.146,6.438 0.521,0.24 3.271,7.833 3.792,8.073 0.521,0.24 1.354,4.344 1.875,4.583 0.521,0.24 1.615,1.833 1.938,1.833 true 1.625,1.49 1.948,1.49 true 0.625,1.292 0.948,1.292 true 1.594,0.635 1.594,0.406 1.594,0.406 1.802,0.406 false 0.146,0.115 0.458,0.313 0.313,0.198 12 false *A 0.24,1.208 0.604,1.646 0.365,0.438 10 false 2Q*B 2P*C 2,1.396 2.438,1.844 0.438,0.448 10 false G216 1.99,1.74 2.448,2.208 0.458,0.469 10 false G218 3.479,7.875 3.635,8.073 0.156,0.198 10 false A 4.573,3.146 4.938,3.583 0.365,0.438 10 false G218 2.177,3.125 2.542,3.563 0.365,0.438 10 false G217 1.865,0.292 2.177,0.49 0.313,0.198 10 false *1 0.854,1.802 1.219,2.24 0.365,0.438 10 false 2M 3.813,4.635 4.177,5.073 0.365,0.438 10 false 2M 6.385,4.635 6.75,5.073 0.365,0.438 10 false 2K 0.885,2.219 1.25,2.656 0.365,0.438 10 false 2K 0.917,2.448 1.281,2.885 0.365,0.438 10 false 2L 5.417,4.635 5.781,5.073 0.365,0.438 10 false 2L 1.521,4.365 1.885,4.802 0.365,0.438 10 false 2Q 1.927,4.365 2.292,4.802 0.365,0.438 10 false *B 1.521,4.688 1.885,5.125 0.365,0.438 10 false 2P 1.938,4.677 2.302,5.115 0.365,0.438 10 false *C 5.844,1.073 6.281,1.521 0.438,0.448 10 false 2N 1.677,6.198 2.115,6.646 0.438,0.448 10 false 2N 5.844,1.708 6.281,2.156 0.438,0.448 10 false 2O 4.792,6.219 5.229,6.667 0.438,0.448 10 false 2O

Text in Illustration
*A Main Body ECU (Multiplex Network Body ECU) with 2 connectors *B for LHD
*C for RHD - -
*1 Main body ECU (multiplex network body ECU) - -

a.

Remove the main body ECU (multiplex network body ECU) from the driver side junction block assembly.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
A-32 (IG) - Body ground None - Body ground Ignition power supply Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V
A-31 (BECU) - Body ground None - Body ground Battery power supply Always 11 to 14 V
A-30 (ACC) - Body ground None - Body ground ACC power supply Ignition switch ACC 11 to 14 V
Ignition switch off Below 1 V
A-11 (GND1) - Body ground None - Body ground Ground Always Below 1 Ω



CHECK MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY


a.
U169991E02
1.156,0.26 1.354,0.438 0.198,0.177 10 false K4 1.563,0.25 1.76,0.427 0.198,0.177 10 false *A 2.396,0.25 2.594,0.427 0.198,0.177 10 false *B 1.99,0.25 2.167,0.427 0.177,0.177 10 false J9

Disconnect the K4*1 or J9*2 multiplex network master switch assembly connector.

*1: for LHD

*2: for RHD


Text in Illustration
*A for LHD
*B for RHD


b.

Measure the resistance and voltage according to the value(s) in the table below.

for LHD
Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
K4-12 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
K4-11 (B) - Body ground L - Body ground Battery power supply Always 11 to 14 V

for RHD
Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
J9-12 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
J9-11 (B) - Body ground L - Body ground Battery power supply Always 11 to 14 V



CHECK FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH


a.
U169968E02
1.573,0.333 1.792,0.51 0.219,0.177 10 false K7

Disconnect the K7 front power window regulator motor assembly LH connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
K7-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
K7-2 (B) - Body ground R - Body ground*1
G - Body ground*2
Battery power supply Always 11 to 14 V

*1: for LHD

*2: for RHD




CHECK FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH


a.
U169969E02
1.583,0.333 1.771,0.51 0.188,0.177 10 false J7

Disconnect the J7 front power window regulator motor assembly RH connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
J7-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
J7-2 (B) - Body ground G - Body ground*1
R - Body ground*2
Battery power supply Always 11 to 14 V

*1: for LHD

*2: for RHD




CHECK REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (for 5 Door)


a.
U115898E04
1.552,0.333 1.781,0.51 0.229,0.177 10 false M4

Disconnect the M4 rear power window regulator motor assembly LH connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
M4-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
M4-2 (B) - Body ground W - Body ground Battery power supply Always 11 to 14 V



CHECK REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH (for 5 Door)


a.
U115899E04
1.573,0.333 1.802,0.51 0.229,0.177 10 false L4

Disconnect the L4 rear power window regulator motor assembly RH connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
L4-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
L4-2 (B) - Body ground W - Body ground Battery power supply Always 11 to 14 V



CHECK SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY (w/ Sliding Roof System)


a.
U171226E04
1.573,0.25 1.969,0.521 0.396,0.271 10 false W20

Disconnect the W20 sliding roof drive gear sub-assembly connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
W20-12 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω
W20-8 (B) - Body ground W - Body ground Battery power supply Always 11 to 14 V



CHECK CERTIFICATION ECU (w/ Entry and Start System)


B340022E54
1.604,0.313 2.052,0.583 0.448,0.271 3.26,0.313 3.708,0.583 0.448,0.271 5,0.313 5.448,0.583 0.448,0.271 1.667,0.354 2.115,0.563 0.448,0.208 10 false G213 5.052,0.365 5.5,0.573 0.448,0.208 10 false G214 3.323,0.365 3.771,0.573 0.448,0.208 10 false G215

a.

Disconnect the G215 certification ECU connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G215-11 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω
G215-10 (+B) - Body ground V - Body ground Battery power supply Always 11 to 14 V



CHECK ID CODE BOX (w/ Entry and Start System)


B429184E02
1.469,0.333 1.938,0.594 0.469,0.26 1.531,0.375 1.927,0.583 0.396,0.208 10 false G207

a.

Disconnect the G207 ID code box connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G207-5 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
G207-1 (+B) - Body ground V - Body ground Battery power supply Always 11 to 14 V



CHECK STEERING LOCK ACTUATOR ASSEMBLY (STEERING LOCK ECU) (w/ Entry and Start System)


a.
U169970E02
1.594,0.271 1.875,0.427 0.281,0.156 10 false G35

Disconnect the G35 steering lock actuator assembly (steering lock ECU) connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G35-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
G35-7 (B) - Body ground G - Body ground Battery power supply Always 11 to 14 V
G35-6 (IG2) - Body ground W - Body ground IG power supply Ignition switch ON 11 to 14 V



CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY


U170044E02
1.615,0.302 1.906,0.479 0.292,0.177 10 false G24 3.969,0.313 4.26,0.49 0.292,0.177 10 false G25 5.896,0.302 6.188,0.479 0.292,0.177 10 false z1

a.

Disconnect the G25 air conditioning amplifier assembly connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G25-14 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
G25-21 (B) - Body ground V - Body ground Battery power supply Always 11 to 14 V
G25-1 (IG+) - Body ground L - Body ground IG power supply Ignition switch ON 11 to 14 V



CHECK INTEGRATION CONTROL AND PANEL ASSEMBLY


a.
U169972E02
1.594,0.302 1.875,0.448 0.281,0.146 10 false G23

Disconnect the G23 integration control and panel assembly connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G23-4 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
G23-5 (IG+) - Body ground L - Body ground*1
G - Body ground*2
IG power supply Ignition switch ON 11 to 14 V*1
10.5 to 16 V*2

*1: w/o Stop and Start System

*2: w/ Stop and Start System




CHECK AIR CONDITIONING CONTROL ASSEMBLY (w/ Rear Air Conditioning System, w/o Rear Seat Heater)


a.

Disconnect the T3 air conditioning control assembly connector.

U149298E03
3.49,0.271 3.76,0.448 0.271,0.177 10 false T3


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
T3-8 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω
T3-5 (IG) - Body ground L - Body ground IG power supply Ignition switch ON 11 to 14 V



CHECK AIR CONDITIONING CONTROL ASSEMBLY (w/ Rear Air Conditioning System, w/ Rear Seat Heater)


a.

Disconnect the T7 air conditioning control assembly connector.

U170567E02
3.542,0.271 3.833,0.427 0.292,0.156 10 false T7


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
T7-8 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω
T7-1 (IG) - Body ground L - Body ground IG power supply Ignition switch ON 11 to 14 V



CHECK RAIN SENSOR (w/ Rain Sensor)


a.
U116123E04
1.615,0.302 1.927,0.531 0.313,0.229 10 false W6

Disconnect the W6 rain sensor connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
W6-2 (ES) - Body ground W-B - Body ground Ground Always Below 1 Ω
W6-4 (SIG) - Body ground GR - Body ground IG power supply Ignition switch ON 11 to 14 V



CHECK WINDSHIELD WIPER RELAY ASSEMBLY (w/ Rain Sensor)


B157223E29
1.469,0.333 1.906,0.563 0.438,0.229 1.51,0.354 1.885,0.552 0.375,0.198 10 false G210

a.

Disconnect the G210 windshield wiper relay assembly connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G210-2 (IG) - Body ground G - Body ground IG power supply Ignition switch ON 11 to 14 V
G210-12 (E) - Body ground W-B - Body ground Body ground Always Below 1 Ω
G210-16 (WIG) - Body ground GR - Body ground IG power supply Ignition switch ON 11 to 14 V



CHECK DOUBLE LOCK DOOR CONTROL RELAY ASSEMBLY (w/ Double Locking System)


a.

Disconnect the G212 double lock door control relay assembly connector.

B417822E01
3.344,0.177 3.823,0.458 0.479,0.281 3.406,0.25 4.021,0.448 0.615,0.198 10 false G212


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G212-7 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
G212-11 (CPUB) - Body ground P - Body ground Battery power supply Always 11 to 14 V
G212-12 (+B) - Body ground R - Body ground Battery power supply Always 11 to 14 V