89581A
1.REMOVE AIR INJECTION CONTROL DRIVER
for Vacuum Brake Booster:
Disconnect the 2 air injection control driver connectors.
Detach the clamp and disconnect the engine wire from the injector driver bracket.
Remove the bolt and air injection control driver.
for Hydraulic Brake Booster:
Disconnect the 2 air injection control driver connectors.
Remove the 2 nuts and air injection control driver.
89879
2.REMOVE INJECTOR DRIVER BRACKET
for Vacuum Brake Booster:
Remove the 2 screws and injector driver bracket.
for Hydraulic Brake Booster:
Remove the 2 screws and injector driver bracket.