Home › Engine / Hybrid System › 2TR-FE (EMISSION CONTROL) › AIR INJECTION DRIVER › from 2020.08
RM27T0E _51 Engine / Hybrid System _053671 2TR-FE EMISSION CONTROL _0260594 AIR INJECTION DRIVER A

2TR-FE EMISSION CONTROL  AIR INJECTION DRIVER  INSTALLATION  


PROCEDURE

Hide 89879 1.INSTALL INJECTOR DRIVER BRACKET

a.

Install the injector driver bracket with the 2 screws.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)


Hide 89581A 2.INSTALL AIR INJECTION CONTROL DRIVER

a.

for Vacuum Brake Booster:

i.

Install the air injection control driver with the bolt.

Torque:
12.5 N*m (127 kgf*cm, 9 ft.*lbf)


ii.

Attach the clamp and connect the engine wire to the injector driver bracket.


iii.

Connect the 2 air injection control driver connectors.



b.

for Hydraulic Brake Booster:

i.

Install the air injection control driver with the 2 nuts.

Torque:
19 N*m (194 kgf*cm, 14 ft.*lbf)


ii.

Connect the 2 air injection control driver connectors.