Home › Engine / Hybrid System › 1GD-FTV (STARTING) › IGNITION SWITCH › from 2020.08
RM27T0E _51 Engine / Hybrid System _053695 1GD-FTV STARTING _0442913 IGNITION SWITCH A

1GD-FTV STARTING  IGNITION SWITCH  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for LHD and RHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 45287 1.REMOVE LOWER STEERING COLUMN COVER

a.

Remove the 2 screws.

HINT:

Turn the steering wheel to the right and left as necessary to remove the 2 screws.



b.
A222873

Detach the 2 claws and remove the lower steering column cover.


Hide 84450 2.REMOVE IGNITION SWITCH ASSEMBLY

a.
A222876

for Manual Transmission:

i.

Disconnect the ignition switch connector and detach the wire harness clamp.


ii.

Remove the 2 screws and ignition switch.



b.
A222874

for Automatic Transmission:

i.

Disconnect the ignition switch connector and key interlock solenoid connector and detach the wire harness clamp.


ii.

Remove the 2 screws and ignition switch.


iii.

Detach the claw and disconnect the key interlock solenoid wire harness from the ignition switch.