Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › ECD SYSTEM › from 2020.08
RM27T0E _51 Engine / Hybrid System _053660 1GD-FTV ENGINE CONTROL _0260475 ECD SYSTEM M

1GD-FTV ENGINE CONTROL  ECD SYSTEM  REGISTRATION  


PROCEDURE

Hide 1. LEARNING VALUES CONFIRMATION

This procedure uses the GTS to display the learned value (Crank Time Compensation Learning Value) stored in the ECM.

A202032E54
0.104,0 2,0.344 1.896,0.344 10 false Learning Values Confirmation: 2.677,0.625 3.021,0.896 0.344,0.271 10 false Start 2.635,1.51 3.073,1.792 0.438,0.281 10 false Notice 2.469,2.302 3.208,2.583 0.74,0.281 10 false Select Item 2.021,4.906 3.688,5.198 1.667,0.292 10 false Confirm Learning Value(s) 2.5,4.396 2.823,4.646 0.323,0.25 10 false Next 2.906,1.896 3.229,2.146 0.323,0.25 10 false Next 2.906,1.063 3.229,1.313 0.323,0.25 10 false Next 1.542,5.167 1.885,5.448 0.344,0.281 10 false Back 5.302,3.073 6.323,3.396 1.021,0.323 10 false Retrieving Error 1.354,3.208 4.281,3.531 2.927,0.323 10 false - Crank Time Compensation Learning Values 5.854,2.729 6.479,2.979 0.625,0.25 10 false Try Again 2.719,5.906 3,6.188 0.281,0.281 10 false End 2.906,5.365 3.198,5.635 0.292,0.271 10 false Exit

HINT:

A malfunction may occur when reading the values if there is a problem with the ECM, a wire harness or the connection to the DLC3. If the wire harnesses and the connection to the DLC3 are inspected and found to be normal, the ECM may be malfunctioning.



a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON and turn the GTS on.

NOTICE:

Do not start the engine.



c.

Enter the following menus: Powertrain / Engine / Utility / Learning values confirmation.


d.

Press "Next".


e.

Select the value to confirm and press "Next".

·

Crank Time Compensation Learning Values



f.

When the next screen is displayed, confirm the contents and press "Exit".


Hide 2. LEARNING VALUES SAVE

This procedure uses the GTS to save the learned value stored in the ECM in the GTS depending on the components being replaced.

A448669E02
0.063,0.073 3.427,0.271 3.365,0.198 10 false Learning Values Save: 2.49,1.396 5.51,1.729 3.021,0.333 10 false - Engine ECM 3.563,0.583 4.333,0.781 0.771,0.198 10 false Next 2.5,1.052 5.521,1.385 3.021,0.333 10 false Select Replaced Component(s) 2.49,2.042 5.51,2.375 3.021,0.333 10 false - Injector Assembly 2.49,1.719 5.51,2.052 3.021,0.333 10 false - Engine Assembly 3.063,0.167 3.833,0.365 0.771,0.198 10 false Start Next 6.313,1.5 7.083,1.698 0.771,0.198 10 false Try Again 5.708,1.969 6.844,2.583 1.135,0.615 10 false Retrieving Error 2.979,3.49 3.75,3.688 0.771,0.198 10 false Next 2.313,4.26 4.979,4.677 2.667,0.417 10 false Learning Value(s) Save Complete 3.51,4.729 4.281,4.927 0.771,0.198 10 false Exit 4.833,4.49 5.604,4.688 0.771,0.198 10 false Overwrite 5.729,4.271 6.875,4.531 1.146,0.26 10 false Confirm Overwrite 3.292,5.156 4.063,5.354 0.771,0.198 10 false End 2.177,5.438 2.948,5.635 0.771,0.198 10 false OK 0.333,5.156 3,5.573 2.667,0.417 10 false No Learning Value to Save

HINT:
·

When replacing the engine assembly or injector assembly together with the ECM, this function automatically determines the data which can be transferred (old data) and saves the data in the GTS.

·

When there is no data to read from the ECM, manually perform the procedure to register each compensation code and learning value in the ECM.

·

A malfunction may occur when reading the values if there is a problem with the ECM, a wire harness or the connection to the DLC3. If the wire harnesses and the connection to the DLC3 are inspected and found to be normal, the ECM may be malfunctioning.



a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON and turn the GTS on.

NOTICE:

Do not start the engine.



c.

Enter the following menus: Powertrain / Engine / Utility / Learning values save.


d.

Press "Next".


e.

Select any components being replaced and press "Next". If no applicable components are displayed, press "Next" without selecting anything.

·

Engine ECU

·

Engine Assembly

·

Injector Assembly



f.

If the overwrite confirmation screen is displayed, press "Overwrite".


g.

When the operation is finished, confirm the date and time of the save operation, and press "Exit".


Hide 3. LEARNING VALUES WRITE

This procedure uses the GTS to write the learned value stored in the GTS to the ECM.

A444901E02
0.156,0.104 3.521,0.302 3.365,0.198 10 false Learning Values Write: 1.802,0.531 2.573,0.729 0.771,0.198 10 false Start 1.5,2.021 2.271,2.219 0.771,0.198 10 false Yes 4.021,1.448 5.448,1.906 1.427,0.458 10 false No Data 3.979,1.719 4.927,2.083 0.948,0.365 10 false Data Error 1.208,1.469 3.396,1.708 2.188,0.24 10 false Saved Date Confirmation 1.146,2.927 3.063,3.156 1.917,0.229 10 false Saved Date Confirmation 1.385,3.365 2.156,3.563 0.771,0.198 10 false Next 5.583,1.24 6.531,1.604 0.948,0.365 10 false Data Error 5.469,1.615 6.417,1.979 0.948,0.365 10 false Retrieving Error 2.031,0.927 2.802,1.125 0.771,0.198 10 false Next 4.01,3.99 5.927,4.219 1.917,0.229 10 false Execute Following Functions 1.26,3.99 3.177,4.219 1.917,0.229 10 false All Setting(s) Complete 3.219,4.99 4.167,5.354 0.948,0.365 10 false End 0.583,4.24 1.354,4.438 0.771,0.198 10 false Back 5.021,4.531 5.792,4.729 0.771,0.198 10 false Exit 6.073,0.927 6.844,1.125 0.771,0.198 10 false Try Again 1.479,4.5 2.25,4.698 0.771,0.198 10 false Exit

HINT:

A malfunction may occur when writing the values if there is a problem with the ECM, a wire harness or the connection to the DLC3. If the wire harnesses and the connection to the DLC3 are inspected and found to be normal, the ECM may be malfunctioning.



a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON and turn the GTS on.

NOTICE:

Do not start the engine.



c.

Enter the following menus: Powertrain / Engine / Utility / Learning values write.


d.

Press "Next".


e.

If the "Error Learning Values Write" screen indicating a problem with the saved value(s) or that there are no saved values is displayed, perform "Learning Values Save" again.


f.

Confirm the date and time of the save operation, and then press "Yes".


g.

Confirm the contents, and then press "Next".

·

Crank Time Compensation Learning Values



h.

Learning Values Write is complete.


Hide 4. DESCRIPTION OF VIN

NOTICE:

The Vehicle Identification Number (VIN) or frame number must be written into a replacement ECM.


This registration section consists of 2 parts: Read VIN or Frame Number and Write VIN or Frame Number.

HINT:

The VIN is a 17-digit alphanumeric vehicle identification number. The GTS is required to register the VIN.


a.

Read VIN or Frame Number: This procedure allows the VIN or frame number stored in the ECM to be read in order to confirm that the VINs or frame numbers, provided on the vehicle body and stored in the vehicle ECM, are the same.


b.

Write VIN or Frame Number: This procedure allows the VIN or frame number to be written into the ECM. If the ECM is replaced, or the ECM VIN or frame number and vehicle VIN or frame number do not match, the VIN or frame number can be registered, or overwritten in the ECM by following this procedure.


Hide 5. READ VIN OR FRAME NUMBER

a.

Confirm the vehicle VIN or frame number.


b.

Connect the GTS to the DLC3.


c.

Turn the ignition switch to ON and turn the GTS on.


d.

Enter the following menus: Powertrain / Engine / Utility / VIN / VIN Read.


e.

According to the display on the GTS, read the VIN or frame number stored in the ECM.


Hide 6. WRITE VIN OR FRAME NUMBER

a.

Confirm the vehicle VIN or frame number.


b.

Connect the GTS to the DLC3.


c.

Turn the ignition switch to ON and turn the GTS on.


d.

Enter the following menus: Powertrain / Engine / Utility / VIN / VIN Write.


e.

According to the display on the GTS, write the vehicle VIN or frame number to the ECM.