Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › ECD SYSTEM › from 2020.08
RM27T0E _51 Engine / Hybrid System _053660 1GD-FTV ENGINE CONTROL _0260475 ECD SYSTEM U

1GD-FTV ENGINE CONTROL  ECD SYSTEM  TERMINALS OF ECM  


A340466E82
0.531,0.438 0.969,0.677 0.438,0.24 1.74,0.438 2.177,0.677 0.438,0.24 2.844,0.438 3.281,0.677 0.438,0.24 3.885,0.438 4.323,0.677 0.438,0.24 5,0.438 5.438,0.677 0.438,0.24 6.156,0.438 6.594,0.677 0.438,0.24 1.813,0.479 2.417,0.667 0.604,0.188 10 false C150 0.604,0.479 1.104,0.708 0.5,0.229 10 false C149 2.906,0.479 3.469,0.667 0.563,0.188 10 false C151 3.948,0.469 4.448,0.667 0.5,0.198 10 false C152 5.063,0.469 5.698,0.698 0.635,0.229 10 false G184 6.219,0.469 6.708,0.656 0.49,0.188 10 false G185

HINT:

Each ECM terminal's standard voltage is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G184-1 (BATT) - G185-5 (E1) L - W-B Battery (for measuring the battery voltage and for the ECM memory) Always 11 to 14 V
G185-18 (IGSW) - G185-5 (E1) W - W-B Ignition switch Ignition switch ON 11 to 14 V
G184-4 (+B) - G185-5 (E1) W - W-B Power source of ECM Ignition switch ON 11 to 14 V
G184-3 (+B2) - G185-5 (E1) W - W-B Power source of ECM Ignition switch ON 11 to 14 V
G184-2 (+B3) - G185-5 (E1) W - W-B Power source of ECM Ignition switch ON 11 to 14 V
G184-14 (MREL) - G185-5 (E1) V - W-B EFI MAIN NO. 1 relay operation signal Ignition switch ON 0 to 1.5 V
10 seconds elapsed after ignition switch off 11 to 14 V
G184-6 (+BD1) - G185-5 (E1) B - W-B EDU relay operation signal Ignition switch ON 11 to 14 V
G184-5 (+BD2) - G185-5 (E1) B - W-B EDU relay operation signal Ignition switch ON 11 to 14 V
G184-19 (GREL) - G185-5 (E1) R - W-B GLOW relay Cranking 0 to 1.5 V
Idling (10 seconds or more after engine start) 11 to 14 V
G184-11 (NSW) - G185-5 (E1) B - W-B Park/Neutral position switch assembly signal*1 Ignition switch ON, shift lever not in P or N 11 to 14 V
Ignition switch ON, shift lever in P or N Below 1.0 V
Clutch start switch assembly signal*2 Ignition switch ON, clutch pedal fully depressed Below 1.0 V
Ignition switch ON, clutch pedal released 11 to 14 V
G185-29 (VCPA) - G185-22 (EPA) LG - P Power source of accelerator pedal position sensor (for VPA) Ignition switch ON 4.5 to 5.5 V
G185-30 (VCP2) - G185-25 (EPA2) R - W Power source of accelerator pedal position sensor (for VPA2) Ignition switch ON 4.5 to 5.5 V
G185-28 (VPA) - G185-22 (EPA) L - P Accelerator pedal position sensor signal (for engine control) Ignition switch ON, accelerator pedal fully released 0.5 to 1.1 V
Accelerator pedal position sensor signal (for engine control) Ignition switch ON, accelerator pedal fully depressed 3.0 to 4.6 V
G185-31 (VPA2) - G185-25 (EPA2) GR - W Accelerator pedal position sensor signal (for sensor malfunction detection) Ignition switch ON, accelerator pedal fully released 0.9 to 2.3 V
Accelerator pedal position sensor signal (for sensor malfunction detection) Ignition switch ON, accelerator pedal fully depressed 3.4 to 5.0 V
C150-30 (VCVG) - C150-29 (EVG) R - G Power source of mass air flow meter sub-assembly (for VG) Ignition switch ON 4.8 to 5.2 V
C150-31 (VG) - C150-29 (EVG) W - G Mass air flow meter sub-assembly signal Idling Pulse generation
(See waveform 1)
C150-28 (THA) - C150-29 (EVG) Y - G Intake air temperature sensor (built into mass air flow meter sub-assembly) Idling, intake air temperature at 20°C (68°F) 0.5 to 3.4 V
C149-26 (THIA) - C149-27 (E2) B - BR Intake air temperature sensor (turbo) Idling, intake air temperature at 0 to 80°C (32 to 176°F) 0.5 to 3.4 V
C149-34 (THW) - C149-27 (E2) R - BR Engine coolant temperature sensor Idling, engine coolant temperature at 80°C (176°F) 0.2 to 1.0 V
G184-22 (STA) - G185-5 (E1) W - W-B Starter signal Cranking 6.0 V or higher
C149-6 (#1D+) - C149-7 (#1D-) W - B No. 1 Injector assembly signal Idling Pulse generation
(See waveform 2)
C149-1 (#2D+) - C149-2 (#2D-) V - P No. 2 Injector assembly signal
C150-7 (#3D+) - C150-6 (#3D-) L - LG No. 3 Injector assembly signal
C149-5 (#4D+) - C149-4 (#4D-) G - L No. 4 Injector assembly signal
C152-17 (VCG) - C152-18 (G2-) B - W Power source of camshaft position sensor (specific voltage) Ignition switch ON 4.5 to 5.5 V
C152-27 (G2+) - C152-18 (G2-) GR - W Camshaft position sensor signal Idling Pulse generation
(See waveform 3)
C152-20 (VCNE) - C152-19 (NE-) R - L Power source of crankshaft position sensor (specific voltage) Ignition switch ON 4.5 to 5.5 V
C152-28 (NE+) - C152-19 (NE-) LG - L Crankshaft position sensor signal Idling Pulse generation
(See waveform 4)
G185-13 (STP) - G185-5 (E1) V - W-B Stop light switch assembly signal Ignition switch ON, brake pedal depressed 7.5 to 14 V
Ignition switch ON, brake pedal released 0 to 1.5 V
G185-12 (ST1-) - G185-5 (E1) B - W-B Stop light switch assembly signal
(opposite to STP)
Ignition switch ON, brake pedal depressed 0 to 1.5 V
Ignition switch ON, brake pedal released 7.5 to 14 V
G184-10 (SPD) - G185-5 (E1) R - W-B Speed signal from combination meter assembly Ignition switch ON, slowly wheel rotated Pulse generation
(See waveform 5)
C149-28 (VCPM) - C149-19 (EPIM) G - B Power source of manifold absolute pressure sensor (specific voltage) Ignition switch ON 4.75 to 5.25 V
C149-18 (PIM) - C149-19 (EPIM) L - B Manifold absolute pressure sensor Negative pressure of 40 kPa (300 mmHg, 11.8 in.Hg) applied 0.1 to 0.7 V
Same as atmospheric pressure 0.8 to 1.5 V
Positive pressure of 170 kPa (1275 mmHg, 50.2 in.Hg) applied 1.6 to 2.3 V
C151-28 (VIJ1) - C151-19 (EIJ1) B - W Power source of fuel pressure sensor (No. 1 injector assembly) Ignition switch ON 4.5 to 5.5 V
C151-18 (PIJ1) - C151-19 (EIJ1) R - W Fuel pressure sensor (No. 1 injector assembly) Engine warmed up, engine idling 1.4 to 1.7 V
C152-24 (VIJ2) - C152-30 (EIJ2) L - Y Power source of fuel pressure sensor (No. 2 injector assembly) Ignition switch ON 4.5 to 5.5 V
C152-29 (PIJ2) - C152-30 (EIJ2) G - Y Fuel pressure sensor (No. 2 injector assembly) Engine warmed up, engine idling 1.4 to 1.7 V
C152-33 (VIJ3) - C152-32 (EIJ3) B - W Power source of fuel pressure sensor (No. 3 injector assembly) Ignition switch ON 4.5 to 5.5 V
C152-26 (PIJ3) - C152-32 (EIJ3) R - W Fuel pressure sensor (No. 3 injector assembly) Engine warmed up, engine idling 1.4 to 1.7 V
C152-22 (VIJ4) - C152-21 (EIJ4) L - Y Power source of fuel pressure sensor (No. 4 injector assembly) Ignition switch ON 4.5 to 5.5 V
C152-23 (PIJ4) - C152-21 (EIJ4) G - Y Fuel pressure sensor (No. 4 injector assembly) Engine warmed up, engine idling 1.4 to 1.7 V
C150-3 (PCV+) - C150-4 (PCV-) W - B Pre-stroke control valve operation signal Idling Pulse generation
(See waveform 6)
C150-2 (PRV+) - C150-1 (PRV-) Y - G Pressure discharge valve signal Ignition switch turned off after idling Pulse generation
C151-1 (VNM+) - G185-5 (E1) W - W-B Variable vane DC motor signal (turbocharger nozzle vane control actuator) Idling Pulse generation
C151-2 (VNM-) - G185-5 (E1) B - W-B Variable vane DC motor signal (turbocharger nozzle vane control actuator) Idling Pulse generation
C151-30 (VNVC) - C151-22 (VNE2) W - L Power source of nozzle vane position sensor (turbocharger nozzle vane control actuator) Ignition switch ON 4.5 to 5.5 V
C151-23 (VNA) - C151-22 (VNE2) R - L Nozzle vane position sensor signal (turbocharger nozzle vane control actuator) Ignition switch ON 2.3 to 2.7 V
C151-29 (VCVL) - C151-20 (EVLU) Y - G Power source of throttle position sensor Ignition switch ON 4.5 to 5.5 V
C151-21 (VLU) - C151-20 (EVLU) R - G Throttle position sensor signal Ignition switch ON, throttle valve
fully opened
3.6 to 4.2 V
Ignition switch ON, throttle valve
fully closed
0.4 to 1.0 V
C151-5 (M+) - G185-1 (ME01) R - W-B Diesel throttle duty signal Engine warmed up, racing engine Pulse generation
C151-4 (M-) - G185-1 (ME01) L - W-B Diesel throttle duty signal Engine warmed up, racing engine Pulse generation
C151-31 (VCEG) - C151-24 (EEGL) Y - BR Power source of EGR valve position sensor Ignition switch ON 4.5 to 5.5 V
C151-25 (EGRA) - C151-24 (EEGL) R - BR EGR valve position sensor Ignition switch ON 0.6 to 1.4 V
C151-6 (EGM+) - G185-5 (E1) L - W-B EGR valve duty signal Engine warmed up, idling Pulse generation
C151-7 (EGM-) - G185-5 (E1) W - W-B EGR valve duty signal Engine warmed up, idling Pulse generation
C149-16 (ECBV) - G185-5 (E1) L - W-B Vacuum switching valve assembly (for EGR bypass valve) Vacuum switching valve assembly (for EGR bypass valve) on 0 to 1.5 V
Vacuum switching valve assembly (for EGR bypass valve) off 11 to 14 V
C150-34 (VCPE) - C150-35 (EPEO) B - G Power source of oil pressure sensor Ignition switch ON 4.5 to 5.5 V
C150-26 (PEO) - C150-35 (EPEO) Y - G Oil pressure sensor Engine warmed up, engine idling 0.8 to 1.1 V
G184-23 (NEO) - G185-5 (E1) P - W-B Crankshaft position sensor signal sent to certification ECU (smart key ECU assembly) Engine warmed up, idling Pulse generation
(See waveform 7)
G185-15 (AC1) - G185-4 (E01) LG - W-B A/C signal A/C switch on 0 to 1.5 V
A/C switch off 11 to 14 V
G185-14 (ACT) - G185-4 (E01) R - W-B A/C signal Ignition switch ON 11 to 14 V
A/C cut control on 0 to 3 V
G184-28 (CANL) - G185-5 (E1) W - W-B CAN communication line Ignition switch ON Pulse generation
(See waveform 8)
G184-17 (CANH) - G185-5 (E1) LG - W-B CAN communication line Ignition switch ON Pulse generation
(See waveform 9)
C152-7 (LIN) - G185-5 (E1) L - W-B LIN communication line Ignition switch ON Pulse generation
(See waveform 10)
C149-17 (CINJ) - G185-5 (E1) V - W-B INJ communication line Engine warmed up, idling Pulse generation
(See waveform 11)
G185-4 (E01) - Body ground W-B - Body ground Ground circuit of ECM Always Below 1 Ω
G185-3 (E02) - Body ground W-B - Body ground Ground circuit of ECM Always Below 1 Ω
G185-5 (E1) - Body ground W-B - Body ground Ground circuit of ECM Always Below 1 Ω
G185-1 (ME01) - Body ground W-B - Body ground Ground circuit of ECM Always Below 1 Ω
G185-8 (EC) - Body ground W-B - Body ground Ground circuit of ECM Always Below 1 Ω
G185-7 (E1D1) - Body ground W-B - Body ground Ground circuit of ECM Always Below 1 Ω
G185-6 (E1D2) - Body ground W-B - Body ground Ground circuit of ECM Always Below 1 Ω
G185-2 (E04) - Body ground W-B - Body ground Ground circuit of ECM Always Below 1 Ω

*1: for Automatic Transmission

*2: for Manual transmission

WAVEFORM 1


A337204E04
0.156,1.417 0.615,1.615 0.458,0.198 10 false GND 1.333,1.969 2.583,2.156 1.25,0.188 10 false 100 μsec./DIV. 2.76,0.073 3.406,0.333 0.646,0.26 10 false 1 V/DIV.

Mass Air Flow Meter Sub-assembly Signal
ECM Terminal Name Between VG and EVG
Tester Range 1 V/DIV., 100 μsec./DIV.
Condition Ignition switch ON


WAVEFORM 2


A449202E01
1.094,1.917 1.958,2.115 0.865,0.198 10 false 1 msec./DIV. 2.781,0.146 3.396,0.344 0.615,0.198 10 false 10 V/DIV. 2.969,1.188 3.344,1.385 0.375,0.198 10 false GND

No. 1 (to No. 4) Injector Assembly Signal
ECM Terminal Name Between #1D+ and #1D-
Between #2D+ and #2D-
Between #3D+ and #3D-
Between #4D+ and #4D-
Tester Range 10 V/DIV., 1 msec./DIV.
Condition Idling with warm engine

HINT:

The waveform varies depending on the injector injection.



WAVEFORM 3


A340470E01
2.854,0.156 3.406,0.344 0.552,0.188 10 false 5 V/DIV. 3.042,1.427 3.406,1.646 0.365,0.219 10 false GND 1.094,1.854 2.052,2.031 0.958,0.177 10 false 20 msec./DIV.

Camshaft Position Sensor Signal
ECM Terminal Name Between G2+ and G2-
Tester Range 5 V/DIV., 20 msec./DIV.
Condition Idling with warm engine

HINT:

The waveform varies depending on the engine speed.



WAVEFORM 4


A340468E01
2.833,0.135 3.396,0.354 0.563,0.219 10 false 2 V/DIV. 1.24,1.833 2.229,2.042 0.99,0.208 10 false 10 msec./DIV. 3.073,1.375 3.417,1.635 0.344,0.26 10 false GND

Crankshaft Position Sensor Signal
ECM Terminal Name Between NE+ and NE-
Tester Range 2 V/DIV., 10 msec./DIV.
Condition Idling with warm engine

HINT:

The wavelength becomes shorter as the engine speed.



WAVEFORM 5


A303294E02
2.75,0.125 3.365,0.333 0.615,0.208 10 false 5 V/DIV. 2.927,1.115 3.302,1.333 0.375,0.219 10 false GND 1.521,1.885 2.521,2.125 1,0.24 10 false 10 msec./DIV.

Vehicle Speed Signal
ECM Terminal Name Between SPD and E1
Tester Range 5 V/DIV., 10 msec./DIV.
Condition Driving at vehicle speed of 40 km/h (25 mph)

HINT:

The wavelength becomes shorter as the vehicle speed increases.



WAVEFORM 6


A346499E01
2.76,0.073 3.385,0.292 0.625,0.219 10 false 10 V/DIV. 1.104,1.865 2.083,2.042 0.979,0.177 10 false 20 msec./DIV. 3.031,1.01 3.365,1.208 0.333,0.198 10 false GND

Pre-stroke Control Valve Signal
ECM Terminal Name Between PCV+ and PCV-
Tester Range 10 V/DIV., 20 msec./DIV.
Condition Idling with warm engine

HINT:

The waveform varies depending on pre-stroke control valve operation.



WAVEFORM 7


A287796E13
2.604,1.625 3.063,1.823 0.458,0.198 10 false GND 0.063,0.063 0.781,0.292 0.719,0.229 10 false 1 V/DIV. 1.167,1.927 2.156,2.135 0.99,0.208 10 false 2 msec./DIV.

Engine Speed Signal
ECM Terminal Name Between NEO and E1
Tester Range 1 V/DIV., 2 msec./DIV.
Condition Idling with warm engine


WAVEFORM 8


A303296E01
2.802,0.156 3.396,0.385 0.594,0.229 10 false 1 V/DIV. 2.99,1.229 3.333,1.469 0.344,0.24 10 false GND 1.615,1.76 2.719,1.969 1.104,0.208 10 false 10 msec./DIV.

CAN Communication Signal
ECM Terminal Name Between CANL and E1
Tester Range 1 V/DIV., 10 msec./DIV.
Condition Engine stopped, Ignition switch ON

HINT:

The waveform varies depending on the CAN communication signal.



WAVEFORM 9


A303295E01
2.771,0.167 3.385,0.375 0.615,0.208 10 false 1 V/DIV. 2.958,1.25 3.344,1.5 0.385,0.25 10 false GND 1.573,1.781 2.625,2.031 1.052,0.25 10 false 10 msec./DIV.

CAN Communication Signal
ECM Terminal Name Between CANH and E1
Tester Range 1 V/DIV., 10 msec./DIV.
Condition Engine stopped, Ignition switch ON

HINT:

The waveform varies depending on the CAN communication signal.



WAVEFORM 10


A349005E01
1.177,2.49 2.188,2.688 1.01,0.198 10 false 10 msec./DIV. 2.917,1.896 3.271,2.104 0.354,0.208 10 false GND 2.698,0.792 3.292,0.99 0.594,0.198 10 false 2 V/DIV.

LIN Communication Signal
ECM Terminal Name Between LIN and E1
Tester Range 2 V/DIV., 10 msec./DIV.
Condition Engine stopped, Ignition switch ON

HINT:

The waveform varies depending on the LIN communication signal.



WAVEFORM 11


A282378E02
2.729,0.583 3.281,0.76 0.552,0.177 10 false 2 V/DIV. 1.625,2.677 2.583,2.865 0.958,0.188 10 false 10 msec./DIV. 3.031,2.271 3.396,2.458 0.365,0.188 10 false GND

LIN Communication Signal
ECM Terminal Name Between CINJ and E1
Tester Range 2 V/DIV., 10 msec./DIV.
Condition Idling with warm engine

HINT:

The waveform is output every 250 msec.