Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › ECD SYSTEM (w/ DPF) › from 2020.08
RM27T0E _51 Engine / Hybrid System _053660 1GD-FTV ENGINE CONTROL _0442647 ECD SYSTEM(w/ DPF) D

1GD-FTV ENGINE CONTROL  ECD SYSTEM(w/ DPF)  SYSTEM DESCRIPTION  


ENGINE CONTROL SYSTEM


A468854C01
4.552,0.76 4.865,0.917 0.313,0.156 10 false *1 6.156,0.49 6.469,0.646 0.313,0.156 10 false *2 6.74,0.802 7.052,0.958 0.313,0.156 10 false *3 3.677,2.521 3.99,2.677 0.313,0.156 10 false *4 4.271,2.802 4.583,2.958 0.313,0.156 10 false *5 5.219,2.844 5.531,3 0.313,0.156 10 false *6 4.365,3.594 4.677,3.75 0.313,0.156 10 false *7 3.771,4.083 4.083,4.24 0.313,0.156 10 false *8 4.417,4.063 4.729,4.219 0.313,0.156 10 false *9 4.052,4.406 4.521,4.563 0.469,0.156 10 false *10 1.604,4.5 2.073,4.656 0.469,0.156 10 false *11 1.542,4.906 2.01,5.063 0.469,0.156 10 false *12 4,5.125 4.469,5.281 0.469,0.156 10 false *13 3.542,5.479 4.01,5.635 0.469,0.156 10 false *14 4.375,5.365 4.844,5.521 0.469,0.156 10 false *15 4.906,5.563 5.375,5.719 0.469,0.156 10 false *16 4.542,6.188 5.01,6.344 0.469,0.156 10 false *17 1.5,5.417 1.969,5.573 0.469,0.156 10 false *18 1.458,5.75 1.927,5.906 0.469,0.156 10 false *19 5.333,6.146 6.021,6.385 0.688,0.24 10 false *20 5.719,6.042 6.188,6.198 0.469,0.156 10 false *21 3.375,6.781 3.844,6.938 0.469,0.156 10 false *22 4.708,7.177 5.177,7.333 0.469,0.156 10 false *23 4.635,7.5 5.104,7.656 0.469,0.156 10 false *24 2.906,5.927 3.375,6.083 0.469,0.156 10 false *25 1.667,5.938 2.135,6.094 0.469,0.156 10 false *26 1.594,6.208 2.063,6.365 0.469,0.156 10 false *27 1.49,6.438 1.958,6.594 0.469,0.156 10 false *28 1.615,6.76 2.083,6.917 0.469,0.156 10 false *29 1.667,7.125 2.135,7.281 0.469,0.156 10 false *30 4.51,1.948 4.979,2.104 0.469,0.156 10 false *31 6.052,0.177 6.365,0.333 0.313,0.156 10 false *32
*1 ECM *2 Pre-stroke Control Valve
*3 Fuel Supply Pump Assembly *4 Common Rail Assembly
*5 Pressure Discharge Valve *6 Glow Plug Controller
*7 Intake Air Temperature Sensor (Turbo) *8 Intercooler
*9 No. 1 Vacuum Switching Valve Assembly (for EGR Bypass Valve) *10 No. 1 EGR Cooler
*11 Mass Air Flow Meter Sub-assembly *12 Intake Air Temperature Sensor (Built Into Mass Air Flow Meter)
*13 Injector Assembly *14 Camshaft Position Sensor
*15 Glow Plug Assembly *16 Electric EGR Control Valve Assembly
*17 Engine Coolant Temperature Sensor *18 Nozzle Vane Position Sensor
*19 Variable Vane DC Motor *20 Manifold Absolute Pressure Sensor
*21 Diesel Throttle Body Assembly *22 Crankshaft Position Sensor
*23 Oil Pressure Switching Valve Assembly *24 Oil Pressure Sender Gauge Assembly
*25 Exhaust Fuel Addition Injector Assembly *26 Exhaust Gas Temperature Sensor
*27 No. 2 Exhaust Gas Temperature Sensor *28 Differential Pressure Sensor
*29 No. 3 Exhaust Gas Temperature Sensor *30 Air Fuel Ratio Sensor
*31 Atmospheric Pressure Sensor *32 Accelerator Pedal Position Sensor



i-ART SYSTEM


In the i-ART (Intelligent Accuracy Refinement Technology) System, i-ART injectors, which are injectors that have built-in pressure sensors, are used.

By incorporating a pressure sensor into the injector, any changes in the internal pressure of the injectors can be confirmed at a point close to where fuel is injected.

The i-ART injector directly detects its internal fuel pressure and fuel temperature.

The ECM receives the pressure waveform signal from the pressure sensor and detects the fuel injection volume to perform so that the fuel injection volume matches the target.

Due to this system, the fuel injection precision even in the smallest amount has been improved and precise control of multilevel injection has been made possible. In turn, combustion is more stable and the noise made during combustion has reduced.

The i-ART injectors automatically perform learning when they are replaced. Therefore, injector compensation code registration and pilot quantity learning is not necessary. Learning is performed while the engine is running.

A379945C01
3.51,3.198 3.073,2.635 3.073,2.635 2.979,2.635 true 3.51,3.688 3.281,3.688 3.281,3.688 3.094,3.604 true 3.646,2.917 3.948,2.385 3.948,2.385 4.073,2.385 true 3.49,2.49 3.146,2.042 3.146,2.042 3.052,2.042 true 3.854,0.656 4.01,0.51 4.01,0.51 4.115,0.51 true 2.813,2.563 3.125,2.76 0.313,0.198 10 false *4 0.135,0.083 0.448,0.281 0.313,0.198 10 false *a 2.906,3.51 3.219,3.708 0.313,0.198 10 false *3 4.125,2.323 4.438,2.521 0.313,0.198 10 false *1 2.865,1.969 3.177,2.167 0.313,0.198 10 false *2 4.156,0.448 4.469,0.646 0.313,0.198 10 false *5
*1 Nozzle *2 Two-Way Valve
*3 Low Suck Volume Nozzle *4 Nozzle Needle
*5
·

Fuel Pressure Sensor

·

Fuel Temperature Sensor


- -
*a Injector Assembly Cross Section Diagram - -



DIESEL PARTICULATE FILTER SYSTEM DESCRIPTION


a.

Diesel Particulate Filter System comprehensively regulates engine control (consists of a catalytic system and a fuel injection system) that purifies particulate matter (PM) by diesel engines. The catalytic system purifies hydrocarbons (HC) and carbon monoxides (CO), and reduces PM with a catalytic converter with the Diesel Particulate Filter (DPF). The fuel injection system adds fuel into the exhaust port using the exhaust fuel addition injector to produce and maintain a proper catalyst temperature for PM forced regeneration.


b.

DPF components:

Component Description
DOC catalytic converter Reduces HC and CO.
DPF catalytic converter Reduces PM.
Exhaust fuel addition injector assembly Adds fuel into the exhaust port in order to raise catalyst temperature for PM forced regeneration.
·

Exhaust gas temperature sensor

·

No. 2 exhaust gas temperature sensor

·

No. 3 exhaust gas temperature sensor


Used for estimating the DPF catalytic converter temperature and adjusting fuel addition by ECM while PM forced regeneration is performed. Also detects the DPF catalytic converter temperature to prevent the catalytic converter temperature from rising too high.
Differential pressure sensor Detects the volume of PM deposits and any incorrect air hose arrangement on the DPF catalytic converter.
Air fuel ratio sensor Used for controlling the air-fuel ratio. By controlling the air-fuel ratio, combustion control and PM forced regeneration are properly regulated.


c.

Diagnostics Trouble Codes (DTCs) table for DPF:

HINT:

This table indicates typical DTC combinations for each malfunction occurrence.


Trouble Area Malfunction DTC No.
DPF catalytic converter Deteriorated or clogged P042000*, P200C4B*, P200E4B*, P244A00*, P244B00*, P245800*, P246300*
Exhaust fuel addition injector assembly Stuck open P20CF00
Stuck closed P042000*, P244A00*, P245800*
Low fuel addition volume P042000*, P244A00*, P244B00*, P245800*, P246300
Open in exhaust fuel addition injector assembly circuit P042000*, P20CB14, P244A00*, P245800*
Short in exhaust fuel addition injector assembly circuit P042000*, P20CB12, P20CF00, P244A00*, P245800*
Open or short in exhaust fuel addition injector assembly circuit P042000*, P200C4B*, P200E4B, P20CB12*, P20CB14*, P20CF00, P244A00*, P245800*
Exhaust gas temperature sensor Open in exhaust gas temperature sensor circuit P042000*, P054411, P054415, P200C4B*, P200E4B*, P203111, P203115, P05442A, P20312A, P242A2A, P242A11, P242A15, P244A00*, P245800*
Short in exhaust gas temperature sensor circuit P042000*, P054411, P054415, P200C4B*, P200E4B*, P203111, P203115, P05442A, P20312A, P242A2A, P242A11, P242A15, P244A00*, P245800*
Exhaust gas temperature sensor P042000*, P054411, P054415, P200C4B*, P200E4B*, P203111, P203115, P05442A, P20312A, P242A2A, P242A11, P242A15, P244A00*, P245800*
Differential pressure sensor Open in differential pressure sensor circuit P042000*, P244A00*, P245211, P245215, P245800*, P246300*
Short in differential pressure sensor circuit P042000*, P244A00*, P245211, P245215, P245800*, P246300*
Differential pressure sensor P042000*, P244A00*, P245211, P245215, P245800*, P246300*
Differential pressure sensor clogged P042000*, P244A00*, P24521C, P245800*, P246300*
Incorrect air hose arrangement of the differential pressure sensor P042000*, P244A00*, P24521C, P245800*, P246300*
Air fuel ratio sensor Open or short in air fuel ratio sensor or heater circuit P003012, P003013, P223713, P223716, P223717, P225111, P225112, P244B00*, P246300*
Air fuel ratio sensor P003012, P003013, P219519, P219618, P223716, P223717, P225111, P225112, P244B00*, P246300*
Exhaust gas leaks Exhaust gas leaks P042000*, P244A00*, P245800*
Fuel leaks Fuel leaks in fuel addition injector P042000*, P200C4B*, P200E4B*, P20CF00*, P244A00*, P244B00*, P245800*, P246300*
Fuel supply pump assembly Correct fuel pressure cannot be fed to the exhaust fuel addition injector assembly P042000*, P244A00*, P244B00*, P245800*, P246300*

*: There may be no DTC output depending on the condition of the malfunction.


d.

Diagnostics trouble code description for DPF:

DTC No. Description
P003012 Short in air fuel ratio sensor or heater circuit (High output)
P003013 Open in air fuel ratio sensor heater control circuit (Low output)
P042000 DPF catalytic converter insufficient temperature increase
P054411 Open or short in exhaust gas temperature sensor circuit (B1S1) (Low output)
P054415 Open or short in exhaust gas temperature sensor circuit (B1S1) (High output)
P05442A Exhaust gas temperature sensor circuit range/performance (B1S1)
P200C4B DPF catalytic converter abnormally high exhaust gas temperature
P200E4B Catalyst system temperature too high bank 1
P203111 Open or short in exhaust gas temperature sensor circuit (B1S2) (Low output)
P203115 Open or short in exhaust gas temperature sensor circuit (B1S2) (High output)
P20312A Exhaust gas temperature sensor circuit range/performance (B1S2)
P20CB12 Short in exhaust fuel addition injector assembly circuit (High output)
P20CB14 Open in exhaust fuel addition injector assembly circuit (Low output)
P20CF00 Exhaust fuel addition injector assembly stuck open
P219519 Air fuel ratio sensor stuck lean
P219618 Air fuel ratio sensor stuck rich
P242A2A Exhaust gas temperature sensor circuit range / performance (B1S3)
P242A11 Open or short in exhaust gas temperature sensor circuit (B1S3) (Low output)
P242A15 Open or short in exhaust gas temperature sensor circuit (B1S3) (High output)
P244A00 DPF catalytic converter excessive differential pressure (Low input)
P244B00 DPF catalytic converter excessive differential pressure (High input)
P24521C Differential pressure sensor is clogged or has incorrect air hose arrangement
P245211 Open or short in differential pressure sensor circuit (Low output)
P245215 Open or short in differential pressure sensor circuit (High output)
P245800 Diesel particulate filter regeneration duration
P246300 DPF catalytic converter soot deposition



COMMON RAIL SYSTEM DESCRIPTION


a.

Common rail system:

The common rail system uses high-pressure fuel for improved fuel economy. This system also provides robust engine power while suppressing engine vibration and noise.

This system stores fuel in the common rail, which has been pressurized and supplied by the fuel supply pump assembly. By storing fuel at high-pressure, the common rail system can provide fuel at stable fuel injection pressures, regardless of engine speed or engine load.

The ECM provides an electric current to the solenoid valve in each injector assembly to regulate the fuel injection timing and volume. The ECM also monitors the internal fuel pressure of the common rail using the fuel pressure sensor built into each injector. The ECM causes the fuel supply pump assembly to supply the fuel necessary to obtain the target fuel pressure.

In addition, this system uses a solenoid valve inside each injector assembly to open and close the fuel passages. Therefore, both fuel injection time and fuel injection volume can be precisely regulated by the ECM.

A444559C01
3.948,0.479 4.26,0.677 0.313,0.198 10 false *1 6.469,0.844 6.781,1.042 0.313,0.198 10 false *2 1.083,1.823 1.396,2.021 0.313,0.198 10 false *3 0.771,3.375 1.083,3.573 0.313,0.198 10 false *4 1.427,3.375 1.74,3.573 0.313,0.198 10 false *5 5.656,3.24 5.969,3.438 0.313,0.198 10 false *6 1.51,4.156 1.823,4.354 0.313,0.198 10 false *7 2.031,6.26 2.344,6.458 0.313,0.198 10 false *8 5.719,6.583 6.031,6.781 0.313,0.198 10 false *9 5.042,7.469 5.354,7.667 0.313,0.198 10 false *11 4.99,8.146 5.302,8.344 0.313,0.198 10 false *12 3.406,7.583 3.719,7.781 0.313,0.198 10 false *10
*1 Common Rail Assembly *2 Pressure Discharge Valve
*3 ECM *4 Crankshaft Position Sensor
*5 Camshaft Position Sensor *6 Injector Assembly
*7 Pre-stroke Control Valve *8 Fuel Supply Pump Assembly
*9 Pressurized Fuel Filter *10 Exhaust Fuel Addition Injector Assembly
*11 Fuel Filter Element Assembly *12 Fuel Tank Assembly
V100143

High Pressure Fuel
V100144

Return Fuel
V100146

Suction Fuel
V100155

Feed Pressure Fuel


HINT:

If there is a problem with a fuel return pipe, as bleeding air from the fuel system may not be able to be performed properly in certain instances, such as after replacing an injector assembly, etc., the engine startability may deteriorate.



b.

Common rail system components:

Component Description
Common rail assembly Stores high-pressure fuel produced by supply pump
Fuel supply pump assembly
·

Operated by crankshaft via timing chain

·

Supplies high-pressure fuel to common rail assembly


Injector assembly Injects fuel to combustion chamber based on signals from ECM
Fuel pressure sensor (Built into injector assembly) Monitors internal fuel pressure of injector assembly and sends signals to ECM
Pressure discharge valve Based on signals from ECM, opens valve when sudden deceleration occurs, or when engine switch is off to prevent fuel pressure from becoming too high
Pre-stroke control valve Based on signals from ECM, adjusts fuel volume supplied to common rail and regulates internal fuel pressure


c.

Diagnostic trouble code (DTC) table for the common rail system:

HINT:

This table indicates typical DTC combinations for each malfunction occurrence.


Trouble Area Malfunction DTC No.
Injector assembly Open or short in injector circuit P009300*, P020112, P020114, P020212, P020214, P020312, P020314, P020412, P020414, P029D00, P02A100, P02A500, P02A900, P062D96
Stuck open P009300, P029D00, P02A100, P02A500, P02A900
Stuck closed P030100, P030200, P030300, P030400
Communication malfunction P167A87, P167B87, P167C87, P167D87
Internal malfunction P168A00, P168A44, P168A46, P168B00, P168B44, P168B46, P168C00, P168C44, P168C46, P168D00, P168D44, P168D46,
Fuel pressure sensor (Built into injector assembly) Open or short in fuel pressure sensor circuit P13A011, P13A015, P13A511, P13A515, P13AA11, P13AA15, P13B011, P13B015, P13E011, P13E015, P13E511, P13E515
Characteristic abnormality of the fuel pressure sensor P13A02A, P13A52A, P13AA2A, P13B02A
Fuel temperature sensor (Built into injector assembly) Characteristic abnormality of the fuel temperature sensor P13C013, P13C513, P13CA13, P13D013
Pressure discharge valve Open or short in pressure discharge valve circuit P008800*, P009300*, P122900*, P127112, P127114
Stuck open P009300
Stuck closed P008800*, P127273
Pre-stroke control valve Open or short in pre-stroke control valve circuit P008800*, P062712, P062714, P122900
Stuck open P008800*, P122900
Common rail system (Fuel system) Fuel leaks in high-pressure area P009300

*: There may be no DTC output depending on the condition of the malfunction.


d.

Diagnostic trouble code description for the common rail system:

DTC No. Description
P008800 Internal fuel pressure too high (275000 kPa [2804 kgf/cm2, 39875 psi] or more)
P009300 Fuel leaks in high-pressure areas
P020112 Short in No. 1 injector circuit (High output)
P020114 Open in No. 1 injector circuit (Low output)
P020212 Short in No. 2 injector circuit (High output)
P020214 Open in No. 2 injector circuit (Low output)
P020312 Short in No. 3 injector circuit (High output)
P020314 Open in No. 3 injector circuit (Low output)
P020412 Short in No. 4 injector circuit (High output)
P020414 Open in No. 4 injector circuit (Low output)
P029D00 Cylinder 1 - Injector Leaking
P02A100 Cylinder 2 - Injector Leaking
P02A500 Cylinder 3 - Injector Leaking
P02A900 Cylinder 4 - Injector Leaking
P030100 Cylinder 1 misfire detected
P030200 Cylinder 2 misfire detected
P030300 Cylinder 3 misfire detected
P030400 Cylinder 4 misfire detected
P062712 Short in pre-stroke control valve circuit (High output)
P062714 Open in pre-stroke control valve circuit (Low output)
P062D96 ECM internal error
P122900 Fuel over-feed
P127112 Short in pressure discharge valve circuit (High output)
P127114 Open in pressure discharge valve circuit (Low output)
P127273 Pressure discharge valve stuck close
P13A011 Open or short in No. 1 injector assembly (fuel pressure sensor) circuit (output voltage is too low) (Sub CPU)
P13A015 Open or short in No. 1 injector assembly (fuel pressure sensor) circuit (output voltage is too high) (Sub CPU)
P13A511 Open or short in No. 2 injector assembly (fuel pressure sensor) circuit (output voltage is too low) (Sub CPU)
P13A515 Open or short in No. 2 injector assembly (fuel pressure sensor) circuit (output voltage is too high) (Sub CPU)
P13AA11 Open or short in No. 3 injector assembly (fuel pressure sensor) circuit (output voltage is too low) (Sub CPU)
P13AA15 Open or short in No. 3 injector assembly (fuel pressure sensor) circuit (output voltage is too high) (Sub CPU)
P13B011 Open or short in No. 4 injector assembly (fuel pressure sensor) circuit (output voltage is too low) (Sub CPU)
P13B015 Open or short in No. 4 injector assembly (fuel pressure sensor) circuit (output voltage is too high) (Sub CPU)
P13E011 Open or short in No. 1 injector assembly (fuel pressure sensor) circuit (output voltage is too low) (Main CPU)
P13E015 Open or short in No. 1 injector assembly (fuel pressure sensor) circuit (output voltage is too high) (Main CPU)
P13E511 Open or short in No. 4 injector assembly (fuel pressure sensor) circuit (output voltage is too low) (Main CPU)
P13E515 Open or short in No. 4 injector assembly (fuel pressure sensor) circuit (output voltage is too high) (Main CPU)
P13A02A No. 1 injector assembly (fuel pressure sensor) circuit range/performance
P13A52A No. 2 injector assembly (fuel pressure sensor) circuit range/performance
P13AA2A No. 3 injector assembly (fuel pressure sensor) circuit range/performance
P13B02A No. 4 injector assembly (fuel pressure sensor) circuit range/performance
P13C013 No. 1 injector assembly (fuel temperature sensor) circuit range/performance
P13C513 No. 2 injector assembly (fuel temperature sensor) circuit range/performance
P13CA13 No. 3 injector assembly (fuel temperature sensor) circuit range/performance
P13D013 No. 4 injector assembly (fuel temperature sensor) circuit range/performance
P167A87 No. 1 injector assembly communication malfunction
P167B87 No. 2 injector assembly communication malfunction
P167C87 No. 3 injector assembly communication malfunction
P167D87 No. 4 injector assembly communication malfunction
P168A00 No. 1 injector assembly internal malfunction
P168A44 No. 1 injector assembly internal malfunction
P168A46 No. 1 injector assembly internal malfunction
P168B00 No. 2 injector assembly internal malfunction
P168B44 No. 2 injector assembly internal malfunction
P168B46 No. 2 injector assembly internal malfunction
P168C00 No. 3 injector assembly internal malfunction
P168C44 No. 3 injector assembly internal malfunction
P168C46 No. 3 injector assembly internal malfunction
P168D00 No. 4 injector assembly internal malfunction
P168D44 No. 4 injector assembly internal malfunction
P168D46 No. 4 injector assembly internal malfunction



FUEL SUPPLY PUMP OPERATION SYSTEM DESCRIPTION


a.

When the cam rotates the roller is pushed up, and in turn the plunger is pushed upward as well. When the plunger is not pushed up by the cam, it is pushed back down by the spring.

W123656C01
0.656,0.396 0.844,0.677 true 2.229,1.302 1.656,1.49 true 2.021,1.771 1.646,1.917 true 2.01,2.229 1.656,2.229 true 2.135,2.448 1.667,2.677 true 2.052,3.031 1.635,3.24 true 0.51,0.25 0.833,0.427 0.323,0.177 10 false *1 1.49,1.417 1.802,1.573 0.313,0.156 10 false *2 1.49,1.833 1.802,1.99 0.313,0.156 10 false *3 1.49,2.146 1.802,2.302 0.313,0.156 10 false *4 1.479,2.594 1.792,2.75 0.313,0.156 10 false *5 1.479,3.135 1.792,3.292 0.313,0.156 10 false *6
*1 Pre-stroke Control Valve *2 Plunger
*3 Spring *4 Shoe
*5 Roller *6 Double Cam



b.

The ECM controls the timing of the pre-stroke control valve opening to regulate the fuel quantity. Consequently, the fuel pressure in the common rail is controlled to the target injection pressure.


c.

The longer the pre-stroke control valve remains open, the quantity of pressure-fed strokes will decrease, as well as the fuel discharge quantity.


d.

Pumping will start when the fuel pressure has become higher than the common rail pressure.

W123658C01
3.302,0.552 3.438,0.271 true 3.417,0.083 3.729,0.24 0.313,0.156 10 false *a
*a Return Fuel - -



e.

The less time the pre-stroke control valve remains open, the quantity of pressure-fed strokes will increase, as well as the fuel discharge quantity.


f.

Pumping will start when the fuel pressure has become higher than the common rail pressure.

W123657