Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › ECD SYSTEM (w/ DPF) › from 2020.08
RM27T0E _51 Engine / Hybrid System _053660 1GD-FTV ENGINE CONTROL _0442647 ECD SYSTEM(w/ DPF) D

1GD-FTV ENGINE CONTROL  ECD SYSTEM(w/ DPF)  FREEZE FRAME DATA  


DESCRIPTION


The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can be helpful in determining whether the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.

HINT:

If it is impossible to duplicate the problem even though a DTC is stored, confirm the freeze frame data.



A301856E12
2.24,0.938 3.083,1.167 0.844,0.229 10 false 0.5 seconds 0.344,0.938 1.188,1.167 0.844,0.229 10 false 0.5 seconds 1.323,0.927 2.167,1.156 0.844,0.229 10 false 0.5 seconds 0.406,2.813 2.844,3.083 2.438,0.271 10 false Freeze frame data recorded 2.375,0.302 3.26,0.563 0.885,0.26 10 false DTC is stored

The ECM records engine conditions in the form of freeze frame data every 0.5 seconds. Using the GTS, 5 separate sets of freeze frame data can be checked.

-

3 data sets from before the DTC was stored

-

1 data set from when the DTC was stored

-

1 data set from after the DTC was stored


These data sets can be used to simulate the condition of the vehicle from around the time of the occurrence of the malfunction. The data may assist in identifying the cause of the malfunction, and in judging whether it was temporary or not.




LIST OF FREEZE FRAME DATA


Tester Display
Total Distance Traveled
Total Distance Traveled - Unit
Vehicle Speed
Target Idle Engine Speed
Engine Speed
Calculate Load
Mass Air Flow Sensor
Atmospheric Pressure
Intake Manifold Absolute Pressure
Intake Manifold Absolute Pressure Supported
Coolant Temperature
Intake Air Temperature
Intake Air Temperature B1S1 (Turbo)
Intake Air Temperature B1S1 (Turbo) Supported
Intake Air Temperature B1S2 (Turbo) Supported
Ambient Temperature
Engine Run Time
IG-ON Coolant Temperature
Initial Engine Coolant Temperature
IG-ON Intake Air Temperature
Initial Engine Intake Air Temperature
Battery Voltage
Battery Sensor Voltage
BATT Voltage
Alternate Duty Ratio
Glow Relay Request Bank 1
Glow Control Unit Duty
Engine Oil Pressure
Engine Oil Pressure VSV
Accel Position
Accelerator Position Sensor No.1 Voltage %
Accelerator Position Sensor No.2 Voltage %
Actual Throttle Position Bank 1
Target Throttle Position Bank 1
Actual Throttle Position Bank 1 Supported
Actual Throttle Position Bank 2 Supported
Target Throttle Position Bank 1 Supported
Target Throttle Position Bank 2 Supported
Throttle Position Sensor No.1 Voltage %
Diesel Throttle Motor Duty Bank 1
Diesel Throttle Target Angle Bank 1
Throttle Close Learning Value Bank 1
Neutral Control
N Range Status
Electric Duty Feedback Value
PS Duty Feedback Value
Total Injection Volume
Target Injection Volume
Injection Feedback Volume for Idle
Injection Volume Cylinder #1
Injection Feedback Value #1
Injection Feedback Value #2
Injection Feedback Value #3
Injection Feedback Value #4
Injection Volume #1
Injection Volume #2
Injection Volume #3
Injection Volume #4
Pilot 1 Injection Period
Pilot 2 Injection Period
Pre Injection Period
Main Injection Period
After Injection Period
Pilot 1 Injection Timing
Pilot 2 Injection Timing
Pre Injection Timing
Main Injection Timing
After Injection Timing
i-ART Learning Status #1
i-ART Learning Status #2
i-ART Learning Status #4
i-ART Learning Status History #1
i-ART Learning Status History #2
i-ART Learning Status History #3
i-ART Learning Status History #4
Injector Leaking Count #1
Injector Leaking Count #2
Injector Leaking Count #3
Injector Leaking Count #4
Injection Pressure Correction
PCV Energization Timing
Target Fuel Pressure (High)
Target Fuel Pressure (High) Supported
Target Fuel Pressure (Low) / Target Fuel Pressure 2
Target Fuel Pressure (Low) / Target Fuel Pressure 2 Supported
Fuel Pressure (High)
Fuel Pressure (High) Supported
Fuel Pressure (Low) / Fuel Pressure 2
Fuel Pressure (Low) / Fuel Pressure 2 Supported
Fuel Pressure #1
Fuel Pressure #2
Fuel Pressure #3
Fuel Pressure #4
Fuel Temperature #1
Fuel Temperature #2
Fuel Temperature #3
Fuel Temperature #4
Fuel Return Temperature
Fuel Injection Valve + Output Signal Bank 1
Fuel Injection Valve - Output Signal Bank 1
Engine Fuel Rate
Vehicle Fuel Rate
Injection Control Malfunction (Target Injection Volume 1)
Injection Control Malfunction (Target Injection Volume 2)
Injection Control Malfunction (Target Injection Volume 3)
Injection Control Malfunction (Injector Current-Carrying Time 1)
Injection Control Malfunction (Injector Current-Carrying Time 2)
Injection Control Malfunction (Injector Current-Carrying Time 3)
Injection Control Malfunction (Fail Safe Function)
Pump Difference Angle Learning Value
Current Fuel Type
A/F (O2) Lambda B1S1
A/F (O2) Lambda B1S1 Supported
A/F (O2) Lambda B1S2 Supported
A/F (O2) Lambda B2S1 Supported
A/F (O2) Lambda B2S2 Supported
A/F (O2) Density B1S1 Supported
A/F (O2) Density B1S2 Supported
A/F (O2) Density B2S1 Supported
A/F (O2) Density B2S2 Supported
Target EGR Valve Position No.1
Target EGR Valve Position No.1 Supported
EGR Step Position Bank 1
Actual EGR Valve Position No.1
Actual EGR Valve Position No.1 Supported
EGR Rate Differential (Actual-Target)
Target EGR Valve Position No.2 Supported
Actual EGR Valve Position No.2 Supported
EGR Cooler Bypass VSV
EGR Cooler Bypass Position
EGR Close Learning Value Bank 1
EGR Position Sensor Bank 1
Target Boost Pressure
Target Boost Pressure Supported
Target Boost Pressure2 Supported
Boost Pressure Sensor Supported
Boost Pressure Sensor2 Supported
Target VN Turbo Position Bank 1
Actual VN Turbo Position Bank 1
Target VN Turbo Position Bank 1 Supported
Actual VN Turbo Position Bank 1 Supported
Target VN Turbo Position Bank 2 Supported
Actual VN Turbo Position Bank 2 Supported
VN Position Sensor Out Bank 1
VN Close Learn Value Bank 1
VN Turbo Minimum Angle
VN Turbo Maximum Angle
Turbo Charger Step Motor Bank 1
Exhaust Temperature B1S1
Exhaust Temperature B1S2
Exhaust Temperature B1S3
Exhaust Temperature B1S1 Supported
Exhaust Temperature B1S2 Supported
Exhaust Temperature B1S3 Supported
Particulate Filter Differential Pressure Bank 1
Particulate Filter Differential Pressure Bank 1 Supported
Catalyst Differential Pressure Bank 1
Differential Pressure Sensor Correction Bank 1
Catalyst Regeneration Switch
DPNR/DPF Status Regeneration (PM)
Exhaust Fuel Addition F/B Bank 1
PM Accumulation Ratio Bank 1
Starter SW
Neutral Position SW
Transfer L4
Stop Light SW
Immobiliser Communication
Clogged Fuel Filter Switch
Cruise Main SW
TC Terminal
MIL ON Run Distance
Running Time from MIL ON
Time after DTC Cleared
Distance from DTC Cleared
Warmup Cycle Cleared DTC
Distance Traveled from Last Battery Cable Disconnect
IG OFF Elapsed Time
Soak IC Current Timer Value
Engine Speed (Starter Off)
Starter Count
Run Distance of Previous Trip
Engine Starting Time
IG ON Time
Glow Request Lighting Time
Engine Coolant Temperature High
Common Rail Pressure Low
Boost Pressure Low
MAF Low
MAF/Estimate MAF Ratio
Minimum Engine Speed
Compression Leakage Count
Plural Cylinders Rough Idle
Rough Idle Cylinder #1
Rough Idle Cylinder #2
Rough Idle Cylinder #3
Rough Idle Cylinder #4
Battery Current
Battery Temperature
Alternator Output Duty Ratio
Alternator Voltage - Non Active Test
Voltage of Alternator
Battery Charging Rate Accuracy
Battery Status of Full Charge
Battery Dark Current
Battery Sensor Sleep Time
ACM Inhibit
Engine Cooling Fun
Brake Override System
Immobiliser Fuel Cut Status
Immobiliser Fuel Cut History
Engine Speed Cylinder #1
Engine Speed Cylinder #2
Engine Speed Cylinder #3
Engine Speed Cylinder #4
Average Engine Speed of All Cylinder
Shift SW Status (P Range)
Shift SW Status (R Range)
Shift SW Status (N Range)
Shift SW Status (S Range)
Shift SW Status (D Range)
ECO Mode SW