Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › ECD SYSTEM (w/ DPF) › from 2020.08
RM27T0E _51 Engine / Hybrid System _053660 1GD-FTV ENGINE CONTROL _0442647 ECD SYSTEM(w/ DPF) C

1GD-FTV ENGINE CONTROL  ECD SYSTEM(w/ DPF)  P02EE00  Cylinder 1 Injector Circuit Range/Performance  P02EF00  Cylinder 2 Injector Circuit Range/Performance  P02F000  Cylinder 3 Injector Circuit Range/Performance  P02F100  Cylinder 4 Injector Circuit Range/Performance  P060694  Control Module Processor Unexpected Operation  P062D00  Fuel Injector Driver Circuit Performance Bank 1  


DESCRIPTION

The ECM monitors the microcomputer for normal operation by calculating and comparing the injection volume command values from 2 systems.

It also monitors the injector operation circuit for malfunctions by back-calculating the actual injection volume from the injection duration returned by the injector operation circuit for each cylinder and comparing it with the injection volume command value.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note
P02EE00 Cylinder 1 Injector Circuit Range/Performance When any condition below is met:
·

Power continues to be supplied to the No. 1 cylinder injector

·

The actual injection operation status does not match the target injection volume of the No. 1 cylinder

·

The injector power duration deviates from the target injection volume of the No. 1 cylinder


(1 trip detection logic)
ECM Comes on DTC stored SAE Code: P02EE
P02EF00 Cylinder 2 Injector Circuit Range/Performance When any condition below is met:
·

Power continues to be supplied to the No. 2 cylinder injector

·

The actual injection operation status does not match the target injection volume of the No. 2 cylinder

·

The injector power duration deviates from the target injection volume of the No. 2 cylinder


(1 trip detection logic)
ECM Comes on DTC stored SAE Code: P02EF
P02F000 Cylinder 3 Injector Circuit Range/Performance When any condition below is met:
·

Power continues to be supplied to the No. 3 cylinder injector

·

The actual injection operation status does not match the target injection volume of the No. 3 cylinder

·

The injector power duration deviates from the target injection volume of the No. 3 cylinder


(1 trip detection logic)
ECM Comes on DTC stored SAE Code: P02F0
P02F100 Cylinder 4 Injector Circuit Range/Performance When any condition below is met:
·

Power continues to be supplied to the No. 4 cylinder injector

·

The actual injection operation status does not match the target injection volume of the No. 4 cylinder

·

The injector power duration deviates from the target injection volume of the No. 4 cylinder


(1 trip detection logic)
ECM Comes on DTC stored SAE Code: P02F1
P060694 Control Module Processor Unexpected Operation When any condition below is met:
·

A malfunction is detected in the "accelerator pedal recognition value" used for calculating the target injection volume

·

A malfunction is detected in the "minimum engine torque" used for calculating the target injection volume

·

A malfunction is detected where the target injection volume is larger than the original target


(1 trip detection logic)
ECM Comes on DTC stored SAE Code: P0606
P062D00 Fuel Injector Driver Circuit Performance Bank 1 A malfunction is detected in the function that stops injection as a fail-safe during a fuel injection control malfunction.
(1 trip detection logic)
ECM Comes on DTC stored SAE Code: P062D

Related Data List
DTC No. Data List
P02EE00
P02EF00
P02F000
P02F100
·

Injection Control Malfunction (Injector Current-Carrying Time 1)

·

Injection Control Malfunction (Injector Current-Carrying Time 2)

·

Injection Control Malfunction (Injector Current-Carrying Time 3)


P060694
·

Injection Control Malfunction (Target Injection Volume 1)

·

Injection Control Malfunction (Target Injection Volume 2)

·

Injection Control Malfunction (Target Injection Volume 3)


P062D00 Injection Control Malfunction (Fail Safe Function)

MONITOR DESCRIPTION

·

The ECM calculates and compares the injection volume command value from 2 systems, and stores P060694 if the accelerator pedal recognition value, minimum engine torque or target injection volume is higher than the original target.

·

The ECU back calculates the actual injection volume from the injection duration returned by the injector operation circuit for each cylinder. When power continues to be supplied to the injector even if there is no injection volume command, the injection operation status does not match the target injection volume, or the injector power duration deviates from the target injection volume, P02EE00, P02EF00, P02F000 or P02F100 is stored.

·

P062D00 is stored if a malfunction is detected in the fail-safe function (that stops injection) during a fuel injection control malfunction.


CONFIRMATION DRIVING PATTERN

DTC No. DTC Detection Drive Pattern
P02EE00
P02EF00
P02F000
P02F100
P060694
Start the engine and idle the engine for 5 seconds or more
P062D00 Start the engine, and then turn the engine switch off to stop the engine

CAUTION / NOTICE / HINT

NOTICE:

After replacing the ECM, the new ECM needs registration (Click here Engine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/ DPF)>REGISTRATION) and initialization (Click here Engine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/ DPF)>INITIALIZATION).


HINT:

Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.


PROCEDURE

1.CHECK FOR ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P02EE00, P02EF00, P02F000, P02F100, P060694 AND/OR P062D00)
a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG) and turn the GTS on.


c.

Enter the following menus: Powertrain / Engine / Trouble Codes.


d.

Read the DTCs.

Result:
Result Proceed to
DTC P02EE00, P02EF00, P02F000, P02F100, P060694 and/or P062D00 is output A
DTC P02EE00, P02EF00, P02F000, P02F100, P060694 and/or P062D00 and other DTCs are output B


HINT:

If any DTCs other than P02EE00, P02EF00, P02F000, P02F100, P060694 and/or P062D00 are output, troubleshoot those DTCs first.




A

2.REPLACE ECM

B

2.REPLACE ECM

Result:
Proceed to
NEXT



NEXT

3.CHECK WHETHER DTC OUTPUT RECURS
3.CHECK WHETHER DTC OUTPUT RECURS
a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG) and turn the GTS on.


c.

Clear the DTCs.


d.

Turn the engine switch off for 30 seconds or more.


e.

Start the engine and wait for 10 seconds or more.


f.

Turn the engine switch off for 30 seconds or more.


g.

Turn the engine switch on (IG) and turn the GTS on.


h.

Enter the following menus: Powertrain / Engine / Trouble Codes.


i.

If no pending DTC is output, the repair has been successfully completed.


Result:
Proceed to
NEXT



NEXT

END