Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TOYOTA PARKING ASSIST-SENSOR SYSTEM (w/ Multi-display) › from 2020.08
RM27T0E _56 Audio / Visual / Telematics _053722 PARK ASSIST / MONITORING _0261009 TOYOTA PARKING ASSIST-SENSOR SYSTEM(w/ Multi-display) D

PARK ASSIST / MONITORING  TOYOTA PARKING ASSIST-SENSOR SYSTEM(w/ Multi-display)  SYSTEM DESCRIPTION  


GENERAL


a.

This system uses ultrasonic sensors to detect any obstacles at the corners and the rear of the vehicle. The system then informs the driver of the distance between the sensors and obstacles as well as their positions by indicating them on the multi-information display in the combination meter and radio and display receiver assembly and by sounding a buzzer.



FUNCTION OF COMPONENTS


Component Function
Back sonar or clearance sonar switch assembly Supplies electrical power to the sensors. Outputssystem on/off signals to the clearance warning ECU.
No. 1 Ultrasonic Sensor Detects the distance between the vehicle and an obstacle.
No. 1 Clearance Warning Buzzer Sounds to inform the driver of the distance to an obstacle.
Combination Meter Assembly
- Multi-information Display
·

Displays the location of an obstacle and the approximate distance between the vehicle and obstacle.

·

Informs the driver of ultrasonic sensor malfunctions.


Combination Meter Assembly

-

Clearance Sonar Indicator



Illuminates to inform the driver while the TOYOTA parking assist-sensor system power is on (the ignition switch is ON and the back sonar or clearance sonar switch assembly is on).
Combination Meter Assembly Transmits the vehicle speed signal to the clearance warning ECU.
Clearance Warning ECU
·

Judges the approximate distance between the vehicle and an obstacle based on the signals from the ultrasonic sensors and sends this value to the multi-information display in the combination meter assembly and radio and display receiver assembly.

·

Sounds the buzzer.


Main Body ECU (Multiplex Network Body ECU)
·

Transmits the destination information to the clearance warning ECU.

·

Transmits the parking brake switch signal to the clearance warning ECU*.


Radio and Display Receiver Assembly
·

Receives the display signals from the clearance warning ECU and displays them on the display panel.

·

Transmits the customization information displayed on the radio and display receiver assembly to the clearance warning ECU.


Air Conditioning Amplifier Assembly Transmit the ambient temperature signal to the clearance warning ECU.

*: for Manual Transmision



OPERATION EXPLANATION


a.

The operating conditions of each ultrasonic sensor differ according to the installation position as shown in the table below.

Installation Position Operating Condition
Front Corner Sensor*1
·

Ignition switch is ON.

·

Back sonar or clearance sonar switch assembly is on.

·

Shift lever is in any position except P*2.

·

Vehicle speed is less than approximately 10 km/h (6.2 mph). The sensors stop operating when the vehicle speed exceeds approximately 15 km/h (9.3 mph), and start operating when the vehicle speed drops below approximately 10 km/h (6.2 mph).


Front Center Sensor*1
·

Ignition switch is ON.

·

Back sonar or clearance sonar switch assembly is on.

·

Shift lever is in any position except P*2 and R.

·

Vehicle speed is less than approximately 10 km/h (6.2 mph). The sensors stop operating when the vehicle speed exceeds approximately 15 km/h (9.3 mph), and start operating when the vehicle speed drops below approximately 10 km/h (6.2 mph).


Rear Corner Sensor
·

Ignition switch is ON.

·

Back sonar or clearance sonar switch assembly is on.

·

Shift lever is in R.


Rear Center Sensor
·

Ignition switch is ON.

·

Back sonar or clearance sonar switch assembly is on.

·

Shift lever is in R.



*1: for 8 Sensor Type

*2: for Automatic Transmission


When the system operates, the clearance warning ECU transmits ultrasonic waves from the ultrasonic sensors. If these waves encounter an obstacle within one or more of the sensors ranges, the waves are reflected back to the sensors, which transmit them to the clearance warning ECU.

Based on this information, the clearance warning ECU sends signals to the indicator and clearance warning buzzer. The appropriate distance between the vehicle and the obstacle is then indicated, and the buzzer sounds.

HINT:

Refer to Detection Range Measurement and Display Inspection (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>TOYOTA PARKING ASSIST-SENSOR SYSTEM (w/ Multi-display)>OPERATION CHECK).




COMMUNICATION SIGNALS OF COMPONENTS


HINT:
·

Allocation refers to the process of the clearance warning ECU setting aside IDs for the sensors.

·

The vehicle has the sensors arranged in 2 groups. There is a front series and a rear series. The sensors are connected in a "daisy chain".



a.

Initialization mode:

*: for 8 Sensor Type


An ID is allocated to each sensor and sensor diagnosis is performed.

E194329E12
1.781,0.188 2.083,0.188 2.083,0.188 2.24,1.042 false 1.75,0.865 1.979,0.865 1.979,0.865 2.156,1.417 false 1.885,2.948 2.094,2.948 2.094,2.948 2.25,2.365 false 1.667,2.094 1.969,2.094 1.969,2.094 2.125,1.948 false 5.469,0.188 5.365,0.188 5.365,0.188 5.271,1.01 false 3.052,0.552 2.896,0.552 2.896,0.552 2.833,1 false 5.51,0.938 5.438,0.938 5.438,0.938 5.354,1.406 false 5.531,2.844 5.406,2.844 5.406,2.844 5.292,2.396 false 5.5,2.073 5.438,2.073 5.438,2.073 5.385,1.969 true 5.51,0.115 7.146,0.49 1.635,0.375 10 false No. 1 Ultrasonic Sensor (Rear Corner Sensor RH) 5.521,0.885 7.135,1.24 1.615,0.354 10 false No. 1 Ultrasonic Sensor (Rear Center Sensor RH) 5.542,1.979 7.104,2.333 1.563,0.354 10 false No. 1 Ultrasonic Sensor (Rear Center Sensor LH) 5.563,2.781 7.146,3.135 1.583,0.354 10 false No. 1 Ultrasonic Sensor (Rear Corner Sensor LH) 0.167,0.104 1.813,0.458 1.646,0.354 10 false No. 1 Ultrasonic Sensor (Front Corner Sensor RH)* 0.865,1.635 1.292,1.802 0.427,0.167 10 false Front 3.125,0.469 4.844,0.813 1.719,0.344 10 false Clearance Warning ECU 0.125,0.771 1.771,1.125 1.646,0.354 10 false No. 1 Ultrasonic Sensor (Front Center Sensor RH)* 0.052,2.021 1.667,2.375 1.615,0.354 10 false No. 1 Ultrasonic Sensor (Front Center Sensor LH)* 0.25,2.844 1.875,3.229 1.625,0.385 10 false No. 1 Ultrasonic Sensor (Front Corner Sensor LH)* 0.26,3.448 1.563,3.74 1.302,0.292 10 false *: for 8 Sensor Type

i.

When the initial check is operating (the ignition switch is ON. and the back sonar or clearance sonar switch assembly is on), the clearance warning ECU provides power to the first sensors in each series (front corner sensor LH* and rear corner sensor LH).

HINT:

Refer to Self-check Function Inspection (Initial Check) (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>TOYOTA PARKING ASSIST-SENSOR SYSTEM (w/ Multi-display)>OPERATION CHECK).



ii.

After the power is supplied, the front corner sensor LH* and rear corner sensor LH enter standby mode to receive an ID from the ECU. When a certain amount of time has elapsed, the ECU sends an ID allocation signal to these sensors.


iii.

The front corner sensor LH* and rear corner sensor LH receive the ID allocation signal from the ECU and perform self-diagnosis. When the sensor self-diagnosis is completed, the ECU sends an ID allocation confirmation signal to these sensors.


iv.

After the ID allocation confirmation is performed, the ECU provides power to the second sensors in each series (front center sensor LH* and rear center sensor LH) via the first sensors. In the same manner as the first sensors, the second sensors enter standby mode. When a certain amount of time has elapsed, the ECU sends an ID allocation signal to the second sensors.


v.

The above operation will be repeated until an ID is allocated to the last sensor, which is in the front series (front corner sensor RH*) and rear series (rear corner sensor RH). Initialization ends when ID allocation to all ultrasonic sensors is completed.



b.

Detection mode:

After initialization mode is completed, the system switches into detection mode. In detection mode, the clearance warning ECU sends information request signals and sensor activation signals to the ultrasonic sensors and receives detection result signals from the sensors.

i.

The ECU regularly sends ID signals, information request signals and sensor activation signals to each ultrasonic sensor according to the communication schedule.


ii.

When a certain amount of time has elapsed (sensor detection operation is completed), the ECU sends an ID signal to the sensor to receive a detection result signal.


iii.

The ultrasonic sensor sends a detection result signal or detection information signal to the ECU.


iv.

The above operation is performed repeatedly for each ultrasonic sensor.