1.CUSTOMIZE TOYOTA PARKING ASSIST-SENSOR SYSTEM
The following items can be customized.
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the GTS
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Customize Setting / Clearance Sonar / Warning, Sensor or Display.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
|---|---|---|---|---|
| Rr Sensor Onset Range | Wide | Set the buzzer activation range for the rear center sensors. | Narrow or Wide
·
Narrow: 650 mm (25.6 in.) ·
Wide: 1500 mm (59.1 in.) |
Clearance warning ECU |
| Fr Sensor Onset Range | Wide | Set the buzzer activation range for the front center sensors. | Narrow or Wide
·
Narrow: 600 mm (23.6 in.) ·
Wide: 1000 mm (39.4 in.) |
Clearance warning ECU |
| Keep Sense Buzzer | Avail | Make the buzzer sound when the distance between the vehicle and obstacle does not change for more than 3 seconds. | Not Avail or Avail
·
Not Avail: Not Available ·
Avail: Available |
Clearance warning ECU |
| Fr & Rr Buzzer Volume | M | Change the buzzer volume setting. | L, M or H
·
L: Low volume ·
M: Medium volume ·
H: High volume |
Clearance warning ECU |
| Temporary Mute Function | ON | Sets the availability of the temporary mute function. | OFF or ON
·
OFF: Temporary mute function off ·
ON: Temporary mute function on |
Clearance warning ECU |
| Sensor Condition N | Avail | Make the front sensors available when the shift lever is in N. | Not Avail or Avail
·
Not Avail: Not Available ·
Avail: Available |
Clearance warning ECU |
| Reverse Range Front Sensor | Fcrn | Change the operation setting for the front sensors when the shift lever is in R. | F, Fcrn or F Stop
·
F: Front sensors are available ·
Fcrn: Front corner sensors are available ·
F Stop: Front sensors are not available |
Clearance warning ECU |
| Non P/R Range Rear Sensor | R Stop | Change the operation setting for the rear sensors when the shift lever is in any position except P or R. | R, Rcrn or R Stop
·
R: All rear sensors are available ·
Rcrn: Rear corner sensors are available ·
R Stop: All rear sensors are not available |
Clearance warning ECU |
Customizing with Multi-information display
Turn the engine switch on (IG).
Enter the following menus: Setting / Vehicle Setting / Parking Assist.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant |
|---|---|---|---|---|
| Volume | 2 | Change the buzzer volume setting. | 1, 2, or 3
·
1: Low volume ·
2: Medium low volume ·
3: High volume |
Clearance warning ECU |