Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › BLIND SPOT MONITOR SYSTEM › from 2020.08
RM27T0E _56 Audio / Visual / Telematics _053722 PARK ASSIST / MONITORING _0261011 BLIND SPOT MONITOR SYSTEM D

PARK ASSIST / MONITORING  BLIND SPOT MONITOR SYSTEM  SYSTEM DESCRIPTION  


GENERAL


a.

The blind spot monitor system has the blind spot monitor function and RCTA function.

i.

Blind spot monitor function

·

The blind spot monitor function is a function that assists the driver in making the decision to change lanes. The function uses quasi-millimeter wave radar to detect vehicles that are traveling in an adjacent lane in the area that is not reflected in the outer rear view mirror assembly. The function advises the driver of the existence of a vehicle by illuminating the outer rear view mirror indicator on the outer rear view mirror assembly.

·

If the turn signal switch is operated while the outer rear view mirror indicator on an outer rear view mirror assembly is illuminated, the indicator starts blinking to give additional warning to the driver.



ii.

RCTA function

·

The RCTA function is a function that informs the driver of an approaching vehicle from diagonally behind. The function uses quasi-millimeter wave radar to detect the positions of and relative speed to a vehicle. When the function determines that a vehicle is approaching this vehicle, this function informs the driver of it using the indicators and buzzer.





FUNCTION OF COMPONENTS


Component Function

*1: for Hydraulic Brake Booster

*2: for Vacuum Brake Booster

*3: for Automatic Transmission

*4: for Manual Transmission

Blind Spot Monitor Sensor
·

Consists of a 24 GHz radar module and an integrated processing module.

·

Illuminates or blinks the outer rear view mirror indicator on the outer rear view mirror assembly.

·

Sounds the RCTA buzzer (blind spot monitor buzzer) when the RCTA function is operating.

·

Changes the outer rear view mirror indicator on the outer rear view mirror assembly from illuminated to blinking when a turn signal switch operation signal is received from the windshield wiper switch assembly with the blind spot monitor function operating.

·

Dims the outer rear view mirror indicator on the outer rear view mirror assembly and blind spot monitor indicator on the blind spot monitor system.

·

Turns on the blind spot monitor indicator on the blind spot monitor system when the blind spot monitor system is on.


Outer Rear View Mirror Assembly
·

Outer Mirror (Outer Rear View Mirror Indicator)


Turns on or blinks the indicator based on a signal from the blind spot monitor sensor.
Steering Pad Switch Assembly
·

Turns the blind spot monitor system on or off via CAN communication.

·

Informs the state of the blind spot monitor system by illuminating the blind spot monitor indicator.


RCTA Buzzer (Blind Spot Monitor Buzzer) Sounds based on a signal from the blind spot monitor sensor.
Combination Meter Assembly
·

Multi-information Display


Displays an error message on the multi-information display if the blind spot monitor detects a malfunction while it is operating.
Main Body ECU (Multiplex Network Body ECU) Sends the destination information and the dimmer signal to the blind spot monitor sensor via CAN communication.
Master Cylinder Solenoid (Skid Control ECU)*1
Brake Actuator Assembly (Skid Control ECU)*2
Transmits a vehicle speed signal to the blind spot monitor sensor via CAN communication.
ECM*3 Sends a shift position signal (R) to the blind spot monitor sensor via CAN communication.
Back-up light switch assembly*4 Sends a shift position signal (R) to the blind spot monitor sensor.
Steering Sensor Detects the angle of the steering wheel and sends the resulting signals to the blind spot monitor sensor via CAN communication.


OPERATION DESCRIPTION


a.

Operation description of the blind spot monitor function

i.

Operation conditions

·

The blind spot monitor system is on.

·

Vehicle speed is more than approximately 16 km/h (10 mph).



ii.

Conditions in which a sensor can detect a vehicle

The blind spot monitor function indicates detection of a vehicle in the detection area when either condition is met:

·

When a vehicle is detected in an adjacent lane overtaking this vehicle.

·

When a vehicle is detected entering the detection area because it changed lanes.



iii.
E348777E03
0.135,0.083 0.448,0.281 0.313,0.198 10 false *a 2.625,0.958 2.938,1.156 0.313,0.198 10 false *b 1.021,4.313 1.333,4.51 0.313,0.198 10 false *c 1.885,4.333 2.198,4.531 0.313,0.198 10 false *d

Detection area

Vehicles in the following areas can be detected:

Text in Illustration
*a Vehicles in the following areas can be detected:
*b Within approximately 3.5 m (11.49 ft.) from the side of the vehicle
*c Within approximately 3 m (9.85 ft.) behind the rear bumper
*d Within approximately 1 m (3.29 ft.) forward of the rear bumper



b.

Operation description of the RCTA function.

i.

Operation conditions:

·

The blind spot monitor system is on.

·

The shift lever is in R.

·

The vehicle speed is less than approximately 8 km/h (5 mph).



ii.

Conditions in which a sensor can detect a vehicle

The RCTA function indicates detection of a vehicle in the detection area when both conditions are met:

·

A vehicle is approaching this vehicle from diagonally behind.

·

The vehicle speed is approximately 8 km/h (5 mph) to 28 km/h (18 mph).



iii.
E254389E01
0.112,0.092 0.313,0.230 0.201,0.139 10 *a 2.587,1.046 2.788,1.184 0.201,0.139 10 *b 1.061,4.384 1.262,4.523 0.201,0.139 10 *c

Detection area

Vehicles in the following areas can be detected:

Text in Illustration
*a Vehicles in the following areas can be detected:
*b Within approximately 5.5 to 20 m (18.04 to 65.62 ft.) from the side of the vehicle (detection area changes according to vehicle speed)
*c Within approximately 6 m (19.69 ft.) behind the rear bumper




OPERATION OF OUTER REAR VIEW MIRROR INDICATOR AND RCTA BUZZER (BLIND SPOT MONITOR BUZZER)


a.

Initial check

i.

When the blind spot monitor system is turned on with the engine switch on (IG), the outer rear view mirror indicator on each outer rear view mirror assembly illuminates for 3 seconds.


ii.

When the blind spot monitor system is turned on with the engine switch on (IG), the outer rear view mirror indicator on each outer rear view mirror assembly illuminates for 3 seconds and the RCTA buzzer assembly (blind spot monitor buzzer) sounds for 1 second.


iii.

When the engine switch turned from off to on (IG) with the blind spot monitor system on, the outer rear view mirror indicator on each outer rear view mirror assembly illuminates for 3 seconds.



b.

Operation for each function

i.
E348778E03
1.313,3.167 1.625,3.365 0.313,0.198 10 false *a 1.823,3.167 2.135,3.365 0.313,0.198 10 false *a 0.281,3.625 0.594,3.823 0.313,0.198 10 false ON 0.271,4.177 0.583,4.375 0.313,0.198 10 false OFF 0.156,2.917 1.229,3.156 1.073,0.24 10 false Blinking Pattern: 0.125,1.667 2.365,1.896 2.24,0.229 10 false Outer rear view mirror indicator RH: 0.115,0.354 2.354,0.583 2.24,0.229 10 false Outer rear view mirror indicator LH:

Operation for blind spot monitor function

·

When a sensor detects a vehicle in the blind spot area, the outer rear view mirror indicator on the outer rear view mirror assembly illuminates.

·

While the sensor is detecting a vehicle in the detection area and the indicator is illuminated, if the turn signal switch is operated, the outer rear view mirror indicator on the outer rear view mirror assembly starts blinking as shown in the illustration.


Text in Illustration
*a 0.125 seconds


ii.

Operation for RCTA function

·

When all of the operation conditions for the RCTA function are met, the outer rear view mirror indicators on the outer rear view mirror assembly blink for 2.5 seconds and the RCTA buzzer (blind spot monitor buzzer) sounds for 2.3 seconds as shown in the illustration.


E254388E04
0.19,0.113 2.487,0.313 2.297,0.200 10 Outer Rear View Mirror Indicator LH: 0.19,1.477 3.383,1.670 3.193,0.193 10 Outer Rear View Mirror Indicator Blinking Pattern: 0.391,2.177 2.121,2.370 1.730,0.193 10 ON 0.391,3.84 2.121,4.033 1.730,0.193 10 ON 0.391,2.794 1.644,2.987 1.253,0.193 10 OFF 0.391,4.484 1.644,4.677 1.253,0.193 10 OFF 0.19,3.125 5.024,3.318 4.834,0.193 10 RCTA Buzzer (Blind Spot Monitor Buzzer) Sounding Pattern: 2.992,0.113 5.308,0.278 2.316,0.165 10 Outer Rear View Mirror Indicator RH: 1.113,1.791 1.272,1.953 0.159,0.162 10 *a 1.37,1.791 1.529,1.953 0.159,0.162 10 *a 1.283,3.465 1.468,3.644 0.185,0.179 10 *c 1.063,3.465 1.248,3.644 0.185,0.179 10 *c 2.403,3.474 2.588,3.653 0.185,0.179 10 *d 3.272,4.656 3.457,4.796 0.185,0.140 10 *e 3.216,2.956 3.401,3.135 0.185,0.179 10 *b

Text in Illustration
*a 0.125 seconds *b 2.5 seconds
*c 0.1 seconds *d 0.4 seconds
*e 2.5 seconds - -