Home › Audio / Visual / Telematics › TELEMATICS › TELEMATICS SYSTEM › 2020.08–2021.06
RM27T0E _56 Audio / Visual / Telematics _056796 TELEMATICS _0277431 TELEMATICS SYSTEM U

TELEMATICS  TELEMATICS SYSTEM  TERMINALS OF ECU  


HINT:

Check from the rear of the connector while it is connected to the components.


TELEMATICS TRANSCEIVER


E342820C56
4.594,0.25 5.01,0.5 0.417,0.25 2.5,0.24 2.917,0.49 0.417,0.25 1.25,0.25 1.667,0.5 0.417,0.25 4.646,0.302 5.26,0.5 0.615,0.198 10 false G187 0.958,0.406 1.271,0.563 0.313,0.156 10 false *a 2.25,0.448 2.563,0.604 0.313,0.156 10 false *b 1.313,0.292 1.927,0.49 0.615,0.198 10 false H102 2.563,0.281 3.177,0.479 0.615,0.198 10 false H101
*a Connector Color: Gray (to GNSS Antenna) *b Connector Color: Blue (to Telephone Antenna)


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G187-1 (+B) - G187-4 (E) R - W-B Power source (+B) Always 11 to 14 V
G187-2 (SPI+) - G187-4 (E) R - W-B Sound signal Audio system playing A waveform synchronized with sound signals is output
G187-3 (SPI-) - G187-4 (E) W - W-B Sound signal Audio system playing A waveform synchronized with sound signals is output
G187-4 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω
G187-5 (SPO+) - G187-4 (E) P - W-B Sound signal Audio system playing, or emergency call mode A waveform synchronized with sound signals is output
G187-6 (SPO-) - G187-4 (E) V - W-B Sound signal Audio system playing, or emergency call mode A waveform synchronized with sound signals is output
G187-7 (IG2) - G187-4 (E) W - W-B Power source (IG) Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V
G187-8 (ACC) - G187-4 (E) P - W-B Power source (ACC) Ignition switch ACC 11 to 14 V
Ignition switch off Below 1 V
G187-10 (SPDP) - G187-4 (E) R - W-B Vehicle speed signal See "Vehicle Signal Check Mode" in Operation Check
w/o Navigation System:(Click here)
w/ Navigation System:(Click here)
-
G187-11 (IND1) - G187-4 (E) P - W-B Manual (SOS) switch indicator (red) illumination signal For 10 seconds after ignition switch turned to ON 1 to 8.5 V
Ignition switch off Below 1 V
G187-12 (IND2) - G187-4 (E) L - W-B Manual (SOS) switch indicator (green) illumination signal For 2 seconds after ignition switch turned to ON and the manual (SOS) switch indicator (red) has illuminated for 10 seconds 1 to 8.5 V
Ignition switch off Below 1 V
G187-15 (CANP) P CAN communication signal - -
G187-16 (CANN) W CAN communication signal - -
G187-17 (MUTE) - G187-4 (E) P - W-B Mute signal Audio system playing 3.5 to 5 V
Emergency call mode Below 1 V
G187-18 (MCO+) - G187-4 (E) B - W-B Sent microphone voice signal See "Microphone Check" in Operation Check
w/o Navigation System:(Click here)
w/ Navigation System:(Click here)
-
G187-19 (MCO-) - G187-4 (E) W - W-B Sent microphone voice signal See "Microphone Check" in Operation Check
w/o Navigation System:(Click here)
w/ Navigation System:(Click here)
-
G187-23 (ILL+) - G187-4 (E) P - W-B Illumination signal Light control switch off Below 1 V
Light control switch in tail or head position 11 to 14 V
G187-24 (GSW) - G187-4 (E) B - W-B Collision detection signal Ignition switch ON Pulse generation
(Refer to waveform 1)
G187-26 (SIG-) - G187-4 (E) LG - W-B Ground Always Below 1 Ω
G187-27 (SIG1) - G187-4 (E) G - W-B Manual (SOS) switch condition signal Manual (SOS) switch not pressed 2.0 to 2.3 V
Manual (SOS) switch pressed Below 1 V
G187-32 (SGND) - G187-4 (E) Shielded - W-B Shield ground Always Below 1 Ω
G187-33 (MCVD) - G187-4 (E) R - W-B Microphone power supply Ignition switch off Below 1 V
Ignition switch ACC 4 to 6 V
G187-34 (MCI+) - G187-4 (E) B - W-B Receive microphone voice signal See "Microphone Check" in Operation Check
w/o Navigation System:(Click here)
w/ Navigation System:(Click here)
-
G187-35 (MCI-) - G187-4 (E) W - W-B Receive microphone voice signal See "Microphone Check" in Operation Check
w/o Navigation System:(Click here)
w/ Navigation System:(Click here)
-

a.
E165239N08
0.156,2.313 0.552,2.542 0.396,0.229 10 false GND

Oscilloscope waveform:

i.

Waveform 1

Item Condition
Tester connection G187-24 (GSW) - G187-4 (E)
Tool setting 5.0 V/DIV., 20 ms/DIV.
Vehicle condition Ignition switch ON