Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
63492
1.REMOVE FRONT ROOF RACK LEG COVER LH (for Type A)
Detach the 4 claws.
Detach the 2 guides and remove the front roof rack leg cover LH.
63494
2.REMOVE REAR ROOF RACK LEG COVER LH (for Type A)
Detach the 4 claws.
Detach the 2 guides and remove the rear roof rack leg cover LH.
63496
3.REMOVE CENTER ROOF RACK LEG COVER LH (for Type A)
Detach the 2 claws and remove the center roof rack leg cover LH.
63470B
4.REMOVE ROOF RACK ASSEMBLY LH (for Type A)
Remove the 5 bolts and roof rack assembly LH.
| *A | for 5 Door | *B | for 3 Door |
75564B
5.REMOVE NO. 2 ROOF DRIP SIDE FINISH MOULDING RETAINER (for Type A)
Remove the 2 bolts and No. 2 roof drip side finish moulding retainer.
63437A
6.REMOVE NO. 2 ROOF CARRIER SEAL (for Type A)
Remove the 4 No. 2 roof carrier seals from roof rack assembly LH.
75631K
7.REMOVE NO. 1 ROOF SIDE GARNISH LID LH (for Type B)
Use the same procedure for all No. 1 roof side garnish lids LH.
|
Protective Tape |
Put protective tape around the No. 1 roof side garnish lid LH.
Using a screwdriver, detach the 2 claws.
Tape the screwdriver tip before use.
Detach the 2 guides and remove the No. 1 roof side garnish lid LH.
63470B
8.REMOVE ROOF RACK ASSEMBLY LH (for Type B)
Put protective tape around the roof rack assembly LH.
Remove the 6 bolts and roof rack assembly LH.
|
Protective Tape | - | - |
63437A
9.REMOVE NO. 2 ROOF CARRIER SEAL (for Type B)
Remove the 6 No. 2 roof carrier seals from roof rack assembly LH.