The ECM and skid control ECU (brake actuator assembly) send and receive signals via CAN communication.
If a communication error occurs between the ECM and brake system control module, the ECM stores this DTC.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| U012987 | Lost Communication With Brake System Control Module Missing Message | There is no communication between the ECM and skid control ECU (brake actuator assembly).
(1 trip detection logic) |
·
ECM ·
Skid control ECU (brake actuator assembly) ·
CAN Communication System |
Does not come on | DTC stored | SAE Code: U0129 |
| DTC No. | DTC Detection Drive Pattern |
|---|---|
| U012987 | Engine switch on (IG) and wait for 5 seconds or more. |
Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.
Connect the GTS to the DLC3.
Turn the engine switch on (IG) and turn the GTS on.
According to the display on the GTS, select "Health Check".
Check for currently output system DTCs.
| Result | Proceed to |
|---|---|
| DTC U012987 is not output | A |
| DTC U012987 is output | B |
A
Click hereEngine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM>CHECK FOR INTERMITTENT PROBLEMS
B
w/ Central Gateway ECU
w/o Central Gateway ECU