Home › Vehicle Interior › SEAT › SEAT MEMORY SWITCH › from 2017.08
RM27T0E _58 Vehicle Interior _053737 SEAT _0261123 SEAT MEMORY SWITCH G

SEAT  SEAT MEMORY SWITCH  INSPECTION  


PROCEDURE

Hide 84927 1.INSPECT SEAT MEMORY SWITCH (for LHD)

B239587C01
1.24,0.521 1.458,0.521 1.458,0.521 1.458,1.083 true 2.021,3.271 2.708,3.229 true 1.844,3.323 2.01,3.844 true 1.698,3.323 1.542,3.823 true 1.521,3.271 1,3.219 true 2.271,1.781 2.271,1.323 true 2.083,0.521 1.896,0.521 1.896,0.521 1.896,1.083 true 1.042,0.417 1.219,0.615 0.177,0.198 10 false *a 2.104,0.417 2.281,0.615 0.177,0.198 10 false *b 1.167,2.479 1.344,2.677 0.177,0.198 10 false *d 2.75,3.135 2.885,3.281 0.135,0.146 10 false E 0.823,3.104 0.979,3.313 0.156,0.208 10 false 2 1.833,3.875 2.344,4.094 0.51,0.219 10 false MMRY 1.469,3.854 1.698,4 0.229,0.146 10 false 1 2.198,1.813 2.375,2.01 0.177,0.198 10 false *c
*a SET Switch
*b 1 Switch
*c 2 Switch
*d Component without harness connected
(Seat Memory Switch)


a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
3 (1) - 1 (E) 1 switch pressed Below 1 Ω
4 (2) - 1 (E) 2 switch pressed
2 (MMRY) - 1 (E) SET switch pressed


If the result is not as specified, replace the seat memory switch.


Hide 84927 2.INSPECT SEAT MEMORY SWITCH (for RHD)

B239588C02
1.073,0.563 1.302,0.563 1.302,0.563 1.302,1.073 true 2.021,3.271 2.51,3.188 true 1.698,3.323 1.542,3.802 true 1.521,3.26 1.031,3.188 true 2.115,1.333 2.115,1.771 true 1.844,3.323 2.031,3.781 true 1.927,0.563 1.677,0.563 1.677,0.563 1.677,1.073 true 2.042,1.792 2.24,2 0.198,0.208 10 false *a 1.948,0.458 2.125,0.656 0.177,0.198 10 false *b 1.135,2.5 1.385,2.729 0.25,0.229 10 false *d 2.542,3.083 2.74,3.281 0.198,0.198 10 false E 0.854,3.063 1.01,3.25 0.156,0.188 10 false 2 1.896,3.813 2.406,4.021 0.51,0.208 10 false MMRY 1.458,3.823 1.688,3.969 0.229,0.146 10 false 1 0.875,0.458 1.052,0.656 0.177,0.198 10 false *c
*a SET Switch
*b 1 Switch
*c 2 Switch
*d Component without harness connected
(Seat Memory Switch)


a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
3 (1) - 1 (E) 1 switch pressed Below 1 Ω
4 (2) - 1 (E) 2 switch pressed
2 (MMRY) - 1 (E) SET switch pressed


If the result is not as specified, replace the seat memory switch.