FREEZE FRAME DATA
Whenever a lighting system DTC is stored, the forward recognition camera stores the current vehicle state as freeze frame data.
CHECK FREEZE FRAME DATA
Turn the ignition switch off.
Connect the GTS to the DLC3
Turn the ignition switch to ON.
Turn the GTS on.
w/ Automatic High Beam System:
Enter the following menus: Body Electrical / Front Recognition Camera (Front Lighting Control) / Trouble Codes.
According to the display on the GTS, select the trouble code data display with Freeze Frame Data.
| Tester Display | Measurement Item / Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Total Distance Traveled | Actual driving distance / 0 to 16777215 | Roughly the same as the actual driving distance | - |
| Total Distance Traveled - Unit | Actual driving distance unit / km or mile | Displays the current actual driving distance unit | - |
| AHB/AHS Information | Lighting system state / unknown, AHB or AHS | Displays lighting system state | - |
CLEAR FREEZE FRAME DATA
Clearing the DTCs will also clear the Freeze Frame Data.
Turn the ignition switch off.
Connect the GTS to the DLC3
Clear the DTCs and Freeze Frame Data.
Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM (for Halogen Headlight)>DTC CHECK / CLEAR