Wear protective gloves. Sharp areas on the parts may injure your hands.
71695B
1.INSTALL REAR NO. 1 SEAT PROTECTOR LH
Attach the claw to install the protector.
71695C
2.INSTALL REAR NO. 1 SEAT PROTECTOR RH
Attach the claw to install the protector.
71697
3.INSTALL REAR SEATBACK EDGE PROTECTOR
Install the protector to the seatback frame.
71078S
4.INSTALL SEPARATE TYPE REAR SEATBACK COVER LH
| *a | Hog Ring Pliers |
Using hog ring pliers, install the seatback cover to the seatback pad with new hog rings.
Be careful not to damage the cover.
When installing the hog rings, avoid wrinkling the cover.
5.INSTALL SEATBACK COVER WITH PAD
| *a | Hog Ring Pliers |
| *b | Hook |
| *c | Hog Ring |
Attach the hook.
Using hog ring pliers, install the seatback cover with pad with new hog rings.
71931B
6.INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY
Attach the 4 claws to install the 2 supports.
72646
7.INSTALL REAR SEATBACK STOP BUTTON GROMMET
Attach the 3 claws to install the grommet.
72661C
8.INSTALL REAR SEATBACK LOCK RELEASE BUTTON
|
Clockwise |
Install the release button as shown in the illustration.
72640A
9.INSTALL REAR SEATBACK LOCK ASSEMBLY LH
While moving the release button in the direction of the arrow in the illustration, attach it to the grommet.
Install the seatback lock with the 2 bolts.
| *a | Hog Ring Pliers |
Using hog ring pliers, install 2 new hog rings.
72666
10.INSTALL REAR SEATBACK LOCK COVER LH
Attach the 2 hooks to install the cover.
Install the 2 screws.
71878A
11.INSTALL REAR SEAT INNER RECLINING COVER LH
Attach the guide and claw to install the cover.
Install the screw.
73390C
12.INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY LH
79959
13.INSTALL REAR SEAT LEG COVER
Attach the guide and claw to install the cover.
Use the same procedure for both covers.
79956
14.INSTALL REAR SEAT LEG BRACKET COVER
Attach the 4 claw to install the cover.
Use the same procedure for both covers.
71393
15.INSTALL REAR SEAT CUSHION BAND
Install the band as shown in the illustration.
71076S
16.INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER LH
| *a | Hog Ring Pliers |
Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.
Be careful not to damage the cover.
When installing the hog rings, avoid wrinkling the cover.
79117C
17.INSTALL NO. 1 SEAT CUSHION COVER LH
Install the cover to the seat cushion pad with new tack pins.
18.INSTALL SEAT CUSHION COVER WITH PAD
Attach the hooks to install the seat cushion cover with pad.
Connect the seat cushion band to the seat cushion cover.
72928
19.INSTALL REAR SEAT CUSHION UNDER COVER LH
Attach the hooks to install the cover.
71695
20.INSTALL REAR SEATBACK PROTECTOR
Attach the 2 hooks to install the protector.
Install the 2 screws.
71324B
21.INSTALL REAR SEAT CUSHION
Install the 2 cushions with the 2 screws.