Wear protective gloves. Sharp areas on the parts may injure your hands.
71940A
1.REMOVE REAR SEAT HEADREST ASSEMBLY
Remove the headrest.
71960B
2.REMOVE REAR SEAT CENTER HEADREST ASSEMBLY
Remove the headrest.
71691H
3.REMOVE REAR NO. 2 SEAT CUSHION HINGE COVER
Using a moulding remover, detach the 6 claws.
Detach the 2 guides and remove the cover.
71691E
4.REMOVE REAR NO. 1 SEAT CUSHION HINGE COVER
Using a moulding remover, detach the 6 claws.
Detach the 2 guides and remove the cover.
71691K
5.REMOVE REAR NO. 4 SEAT CUSHION HINGE COVER
Operate the reclining release handle to move the seat into the position shown in the illustration.
Using a moulding remover, detach the claw and remove the cover.
71691J
6.REMOVE REAR NO. 3 SEAT CUSHION HINGE COVER
Using a moulding remover, detach the claw and remove the cover.
7.REMOVE REAR NO. 1 SEAT ASSEMBLY LH
w/ Seat Belt Warning System:
Disconnect the floor wire harness connector.
Remove the 3 bolts, nut and seat.
Be careful not to damage the vehicle body.