Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Tumble Seat Type LH Side) › from 2021.06
RM27T0E _58 Vehicle Interior _053737 SEAT _0261128 REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Tumble Seat Type LH Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Tumble Seat Type LH Side)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL REAR NO. 1 SEAT ASSEMBLY LH

a.

Place the seat in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.

Temporarily install the seat with the 3 bolts and nut.


c.
B240280E01
1.139,1.775 1.355,1.958 0.216,0.184 10 (1) 0.672,1.408 0.888,1.592 0.216,0.184 10 (2) 2.549,0.443 2.765,0.627 0.216,0.184 10 (3) 2.904,0.701 3.120,0.885 0.216,0.184 10 (4)

Tighten the bolts and nut in the order indicated in the illustration.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


d.

w/ Seat Belt Warning System:

i.

Connect the floor wire harness connector.



Hide 71691J 2.INSTALL REAR NO. 3 SEAT CUSHION HINGE COVER

a.

Attach the claw to install the cover.


Hide 71691K 3.INSTALL REAR NO. 4 SEAT CUSHION HINGE COVER

a.

Attach the claw to install the cover.


Hide 71691E 4.INSTALL REAR NO. 1 SEAT CUSHION HINGE COVER

a.

Return the seat to the upright position.


b.
B240274

Attach the 2 guides and 6 claws to install the cover.


Hide 71691H 5.INSTALL REAR NO. 2 SEAT CUSHION HINGE COVER

a.
B240272

Attach the 2 guides and 6 claws to install the cover.


Hide 71960B 6.INSTALL REAR SEAT CENTER HEADREST ASSEMBLY

a.

Install the headrest.


Hide 71940A 7.INSTALL REAR SEAT HEADREST ASSEMBLY

a.

Install the headrest.


Hide 8.CHECK SEAT BELT WARNING SYSTEM (w/ Seat Belt Warning System)