Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Tumble Seat Type RH Side) › from 2021.06
RM27T0E _58 Vehicle Interior _053737 SEAT _0261129 REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Tumble Seat Type RH Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Tumble Seat Type RH Side)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL REAR NO. 1 SEAT ASSEMBLY RH

B240279E01
1.059,1.681 1.276,1.858 0.218,0.177 10 (1) 0.578,1.381 0.795,1.557 0.218,0.177 10 (2) 2.421,0.298 2.638,0.475 0.218,0.177 10 (3) 2.915,0.547 3.133,0.724 0.218,0.177 10 (4)

a.

Place the seat in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.

Temporarily install the seat with the 3 bolts and nut.


c.

Tighten the bolts and nut in the order indicated in the illustration.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


d.

w/ Seat Belt Warning System:

i.

Connect the floor wire harness connector.



Hide 71691J 2.INSTALL REAR NO. 3 SEAT CUSHION HINGE COVER

a.

Attach the claw to install the cover.


Hide 71691K 3.INSTALL REAR NO. 4 SEAT CUSHION HINGE COVER

a.

Attach the claw to install the cover.


Hide 71691E 4.INSTALL REAR NO. 1 SEAT CUSHION HINGE COVER

a.

Return the seat to the upright position.


b.
B241075

Move the cover in the direction of the arrow to attach the 2 guides.


c.

Attach the 6 claws to install the cover.


Hide 71691H 5.INSTALL REAR NO. 2 SEAT CUSHION HINGE COVER

B241073

a.

Move the cover in the direction of the arrow to attach the 2 guides.


b.

Attach the 6 claws to install the cover.


Hide 71940A 6.INSTALL REAR SEAT HEADREST ASSEMBLY

a.

Install the headrest.


Hide 7.CHECK SEAT BELT WARNING SYSTEM (w/ Seat Belt Warning System)