Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Slide Walk-in Seat Type LH Side) › from 2021.06
RM27T0E _58 Vehicle Interior _053737 SEAT _0261118 REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Slide Walk-in Seat Type LH Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Slide Walk-in Seat Type LH Side)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 71940A 1.REMOVE REAR SEAT HEADREST ASSEMBLY

a.

Remove the rear seat headrest assembly.


Hide 72152A 2.REMOVE REAR SEAT TRACK INNER BRACKET COVER

B237608

a.

Using moulding remover A, detach the 2 claws and guide, and then remove the rear seat track inner bracket cover.


Hide 72159B 3.REMOVE REAR SEAT OUTER TRACK BRACKET COVER

B237606

a.

Using moulding remover A, detach the 2 claws.


b.

Move the cover in the direction of the arrow to detach the 2 guides, and then remove the rear seat outer track bracket cover.


Hide 72158 4.REMOVE SEAT TRACK INNER BRACKET COVER LH

B237612

a.

Using a clip remover, detach the 6 clips and remove the seat track inner bracket cover LH.


Hide 72138B 5.REMOVE SEAT TRACK COVER LH

B237610

a.

Using a clip remover, detach the 3 clips and remove the seat track cover LH.


Hide 6.REMOVE REAR SEAT ASSEMBLY LH

a.

w/ Seat Wire Harness:

i.

Disconnect the floor wire harness connector.



b.
B237788

Disconnect the center inner seat belt from the rear seat assembly.


c.

Remove the 5 bolts, nut and rear seat assembly LH.

NOTICE:

Be careful not to damage the vehicle body.


HINT:

Be sure to remove the seat with the seatback folded down.