Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY (for Manual Seat Type LH Side) › from 2021.06
RM27T0E _58 Vehicle Interior _053737 SEAT _0261104 REAR NO. 2 SEAT ASSEMBLY(for Manual Seat Type LH Side) A

SEAT  REAR NO. 2 SEAT ASSEMBLY(for Manual Seat Type LH Side)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 58410R 1.REMOVE DECK BOARD ASSEMBLY

a.

Operate the 2 rear seat lock release levers and fold down the 2 seatbacks.


b.
B237359C05
1.813,1.948 1.813,2.667 1.813,2.667 2.135,2.667 true 2.156,2.594 2.313,2.74 0.156,0.146 10 false *a
*a Protective Tape


Using a screwdriver, detach the 2 claws and open the cover.

HINT:
·

Tape the screwdriver tip before use.

·

Use the same procedure to open the cover on the other side.




c.
B239969

Remove the 2 bolts.


d.

Detach the 4 clips and remove the deck board.


Hide 58418A 2.REMOVE REAR NO. 4 FLOOR BOARD

a.
B236502C03
2.958,1.49 3.208,1.49 3.208,1.49 2.865,1.792 true 3.219,1.396 3.365,1.542 0.146,0.146 10 false *a
*a Guide


Using a moulding remover, detach the clip and 3 claws.


b.

Detach the 2 guides and remove the floor board.


Hide 58417 3.REMOVE REAR NO. 3 FLOOR BOARD (w/o Rear Air Conditioning System)

a.
B239971C03
0.219,1.104 0.344,1.104 0.344,1.104 0.417,1.25 false 0.76,1.646 1.51,1.646 true 0.052,1.031 0.208,1.177 0.156,0.146 10 false *a 1.531,1.542 1.688,1.688 0.156,0.146 10 false *a
*a Guide


Using a moulding remover, detach the clip and 4 claws.


b.

Detach the 2 guides and remove the floor board.


Hide 58417 4.REMOVE REAR NO. 3 FLOOR BOARD (w/ Rear Air Conditioning System)

a.
B236503C01
0.677,1.396 0.385,1.573 0.385,1.573 0.802,1.531 true 0.24,1.479 0.438,1.635 0.198,0.156 10 false *a
*a Guide


Using a moulding remover, detach the clip and 3 claws.


b.

Detach the 2 guides and remove the floor board.


Hide 58574A 5.REMOVE REAR FLOOR MAT SUPPORT PLATE

a.

Remove the 3 bolts.

B239970C01
1.906,2.094 1.906,2.573 1.906,2.573 2.042,2.573 true 5.552,1.375 5.552,2.542 5.552,2.542 5.417,2.542 true 2.073,2.5 2.229,2.646 0.156,0.146 10 false *a 5.26,2.469 5.417,2.615 0.156,0.146 10 false *a
*a Guide - -



b.

Detach the 4 claws and 2 guides.


c.

Detach the 5 clips and remove the support plate.


Hide 58439D 6.REMOVE DECK BOARD BRACKET REINFORCEMENT

a.
B240098C01
0.521,1.552 0.521,1.125 0.521,1.125 0.625,1.125 true 2.979,0.979 2.979,0.823 2.979,0.823 2.458,0.823 true 0.635,1.042 0.792,1.188 0.156,0.146 10 false *a 2.281,0.74 2.438,0.885 0.156,0.146 10 false *a
*a Hook


Remove the 2 bolts.


b.

Detach the 2 hooks and remove the reinforcement.


Hide 58417D 7.REMOVE NO. 1 DECK BOARD BRACKET LH

a.
B237365

Remove the 2 bolts and bracket.


Hide 8.REMOVE REAR NO. 2 SEAT ASSEMBLY LH

a.

w/ Seat Belt Warning System:

i.

Open the cover.

B620978


ii.

detach the clamp and disconnect the 2 connectors.



b.
B237367

Operate the rear seat lock release lever and raise the seatback.


c.

Pull out the seat cushion.


d.

Remove the 2 bolts.


e.
B237357C02
2.719,0.802 2.438,0.802 true 0.448,1.375 0.729,1.375 true 2.625,0.969 2.344,0.969 true 0.708,1.635 0.302,1.635 true 0.292,1.302 0.469,1.479 0.177,0.177 10 true *a 2.198,0.896 2.354,1.042 0.156,0.146 10 false *b 2.271,0.729 2.438,0.885 0.167,0.156 10 true *a 0.115,1.542 0.271,1.688 0.156,0.146 10 false *b
*a Protective Tape
*b Guide


Using a screwdriver, detach the 2 guides and 6 claws and open the 2 covers.

HINT:

Tape the screwdriver tip before use.



f.
B237358

Remove the 2 bolts.


g.
B236507

Remove the rear No. 2 seat assembly from the vehicle.

NOTICE:

Be careful not to damage the vehicle body.


HINT:

If removing the seat on the RH side with the LH side installed, remove it with the rear seat leg cover LH raised as shown in the illustration.