73390C
1.INSPECT REAR NO. 1 SEAT INNER BELT ASSEMBLY LH
| *a | Component without harness connected
(Rear No. 1 Seat Inner Belt Assembly LH) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 4 (LBR+) - 5 (LBR-) | Seat belt unfastened | Below 1 Ω |
| Seat belt fastened | 1 MΩ or higher |
If the result is not as specified, replace the rear No. 1 seat inner belt assembly LH.