Home › Vehicle Interior › SEAT BELT › REAR NO. 1 SEAT INNER BELT ASSEMBLY (for 60/40 Split Double-folding Seat Type RH Side) › from 2021.06
RM27T0E _58 Vehicle Interior _053738 SEAT BELT _0261154 REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Double-folding Seat Type RH Side) A

SEAT BELT  REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Double-folding Seat Type RH Side)  INSTALLATION  


PROCEDURE

Hide 73380C 1.INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH

a.
B613922C02
1.229,1.021 1.438,1.24 0.208,0.219 10 true (2) 2.125,2.323 2.333,2.542 0.208,0.219 10 true (1)
V100135

Bolt
V100136

Connector


Temporarily install the 2 bolt in the order shown in the illustration.


b.

Tighten the 2 bolt in the order shown in the illustration and install the rear No.1 seat inner belt assembly RH.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Check the inner belt rotate smoothly.



c.

w/ Seat Belt Warning System:

i.

Connect the 2 connectors.



Hide 73310A 2.CONNECT NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY RH

a.
B242821C04
1.281,2.5 1.26,2.552 false 1.302,2.5 1.281,2.542 false 1.292,2.5 1.271,2.542 false 1.323,2.5 1.292,2.552 false 1.313,2.5 1.292,2.542 false 1.333,2.51 1.313,2.552 false 1.323,2.5 1.302,2.552 false 1.344,2.51 1.313,2.563 false 1.333,2.531 2.083,2.531 true 2.094,2.438 2.417,2.719 0.323,0.281 10 false *a
*a Protruding Part


Connect the 3 point type belt floor anchor with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

The anchor part of the seat belt must not overlap the protruding part.



b.

Return the seat cushion to its original position.


Hide 3.CHECK SEAT BELT WARNING SYSTEM (w/ Seat Belt Warning System)