73380C
1.INSPECT REAR NO. 1 SEAT INNER BELT ASSEMBLY RH
| *a | Component without harness connected
(Rear No. 1 Seat Inner Belt Assembly RH) |
- | - |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| t2-4 (RBR+) - t2-5 (RBR-) | Seat belt unfastened | Below 1 Ω |
| Seat belt fastened | 1 MΩ or higher | |
| t2-1 (CBR+) - z27-4 | Always | Below 1 Ω |
| t2-2 (CBR-) - z27-5 | Always | Below 1 Ω |
If the result is not as specified, replace the rear No. 1 seat inner belt assembly RH.