Home › Vehicle Interior › SEAT BELT › REAR NO. 1 SEAT INNER BELT ASSEMBLY (for 60/40 Split Tumble Seat Type RH Side) › from 2021.06
RM27T0E _58 Vehicle Interior _053738 SEAT BELT _0261156 REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Tumble Seat Type RH Side) G

SEAT BELT  REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Tumble Seat Type RH Side)  INSPECTION  


PROCEDURE

Hide 73380C 1.INSPECT REAR NO. 1 SEAT INNER BELT ASSEMBLY RH

a.
B613940C02
1.063,1.625 1.427,1.625 1.427,1.625 1.667,1.229 true 1.969,1.229 2.438,1.615 true 0.073,0.063 0.385,0.219 0.313,0.156 10 false *a 2.479,1.531 3.094,1.729 0.615,0.198 10 false RBR+ 0.708,1.531 1.323,1.729 0.615,0.198 10 false RBR-
*a Component without harness connected
(Rear No.1 Seat Inner Belt Assembly RH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
4 (RBR+) - 5 (RBR-) Seat belt unfastened Below 1 Ω
Seat belt fastened 1 MΩ or higher


If the result is not as specified, replace the rear No. 1 seat inner belt assembly RH.