Home › Vehicle Interior › SEAT BELT › REAR NO. 1 SEAT INNER BELT ASSEMBLY (for 60/40 Split Slide Walk-in Seat Type LH Side) › from 2021.06
RM27T0E _58 Vehicle Interior _053738 SEAT BELT _0261157 REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Slide Walk-in Seat Type LH Side) G

SEAT BELT  REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Slide Walk-in Seat Type LH Side)  INSPECTION  


PROCEDURE

Hide 73390C 1.INSPECT REAR NO. 1 SEAT INNER BELT ASSEMBLY LH (for LHD)

a.
B583934C02
1.729,1.396 2.5,1.75 true 0.865,1.781 1.469,1.365 true 0.104,0.094 0.417,0.25 0.313,0.156 10 false *a 2.542,1.667 3.156,1.865 0.615,0.198 10 false LBR+ 0.531,1.677 1.146,1.875 0.615,0.198 10 false LBR-
*a Component without harness connected
(Rear No. 1 Seat Inner Belt Assembly LH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (LBR-) - 3 (LBR+) Seat belt unfastened Below 1 Ω
Seat belt fastened 1 MΩ or higher


If the result is not as specified, replace the rear No. 1 seat inner belt assembly LH.


Hide 73380C 2.INSPECT REAR NO. 1 SEAT INNER BELT ASSEMBLY RH (for RHD)

a.
B583934C06
1.74,1.365 2.542,1.792 true 0.865,1.781 1.469,1.365 true 0.104,0.104 0.417,0.26 0.313,0.156 10 false *a 2.573,1.729 3.188,1.927 0.615,0.198 10 false RBR+ 0.521,1.698 1.135,1.896 0.615,0.198 10 false RBR-
*a Component without harness connected
(Rear No. 1 Seat Inner Belt Assembly RH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (RBR-) - 3 (RBR+) Seat belt unfastened Below 1 Ω
Seat belt fastened 1 MΩ or higher


If the result is not as specified, replace the rear No. 1 seat inner belt assembly RH.