Home › Vehicle Interior › SEAT BELT › REAR NO. 1 SEAT INNER BELT ASSEMBLY (for 60/40 Split Slide Walk-in Seat Type RH Side) › from 2021.06
RM27T0E _58 Vehicle Interior _053738 SEAT BELT _0261158 REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Slide Walk-in Seat Type RH Side) G

SEAT BELT  REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Slide Walk-in Seat Type RH Side)  INSPECTION  


PROCEDURE

Hide 73380C 1.INSPECT REAR NO. 1 SEAT INNER BELT ASSEMBLY RH (for LHD)

a.
B583934C03
1,1.667 1.458,1.375 true 1.75,1.396 2.438,1.635 true 0.073,0.063 0.385,0.219 0.313,0.156 10 false *a 0.594,1.594 1.208,1.792 0.615,0.198 10 false RBR- 2.5,1.563 3.115,1.76 0.615,0.198 10 false RBR+
*a Component without harness connected
(Rear No. 1 Seat Inner Belt Assembly RH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (RBR-) - 3 (RBR+) Seat belt unfastened Below 1 Ω
Seat belt fastened 1 MΩ or higher


If the result is not as specified, replace the rear No. 1 seat inner belt assembly RH.


Hide 73390C 2.INSPECT REAR NO. 1 SEAT INNER BELT ASSEMBLY LH (for RHD)

a.
B583934C05
0.906,1.729 1.469,1.365 true 1.76,1.365 2.5,1.646 true 0.083,0.083 0.396,0.24 0.313,0.156 10 false *a 0.563,1.635 1.177,1.833 0.615,0.198 10 false LBR- 2.563,1.583 3.177,1.781 0.615,0.198 10 false LBR+
*a Component without harness connected
(Rear No. 1 Seat Inner Belt Assembly LH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (LBR-) - 3 (LBR+) Seat belt unfastened Below 1 Ω
Seat belt fastened 1 MΩ or higher


If the result is not as specified, replace the rear No. 1 seat inner belt assembly LH.