CHECK COMBINATION METER (for 5L-E)
Disconnect the G6 meter connector.
Measure the resistance and voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| G6-21 (E2) - Body ground | BR - Body ground | Ground | Always | Below 1 Ω |
| G6-26 (B) - Body ground | L - Body ground | Combination meter B line | Always | 11 to 14 V |
| G6-28 (IG+) - Body ground | R - Body ground | Combination meter IG+ line | Ignition switch ON | 11 to 14 V |
Reconnect the G6 meter connector.
Measure the voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| G7-15 (P/SB) - Body ground | L - Body ground | Front passenger seat belt signal | Front passenger seat occupied, seat belt fastened | Below 1 V |
| Front passenger seat occupied, seat belt unfastened | 11 to 14 V |
CHECK COMBINATION METER (except 5L-E)
Disconnect the G304 meter connector.
Measure the resistance and voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| G304-20 (E2) - Body ground | BR - Body ground | Ground | Always | Below 1 Ω |
| G304-21 (B) - Body ground | L - Body ground | Combination meter B line | Always | 11 to 14 V |
| G304-22 (IG+) - Body ground | R - Body ground | Combination meter IG+ line | Ignition switch ON | 10.5 to 16 V*1
11 to 14 V*2 |
*1: w/ Stop and Start System
*2: w/o Stop and Start System
Reconnect the G304 meter connector.
Measure the voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| G304-11 (PBKL) - Body ground | L - Body ground | Front passenger seat belt signal | Front passenger seat occupied, seat belt fastened | Below 1 V |
| Front passenger seat occupied, seat belt unfastened | 11 to 14 V | |||
| G304-28 (RCSB) - Body ground*1 | LG - Body ground | Rear No. 1 center seat belt buckle switch signal | Rear No. 1 center seat belt fastened | 11 to 14 V |
| Rear No. 1 center seat belt not fastened | Below 1 V | |||
| G304-23 (RRSB) - Body ground*1 | L - Body ground | Rear No. 1 RH seat belt buckle switch signal | Rear No. 1 RH seat belt fastened | 11 to 14 V |
| Rear No. 1 RH seat belt not fastened | Below 1 V | |||
| G304-36 (RLSB) - Body ground*1 | B - Body ground | Rear No. 1 LH seat belt buckle switch signal | Rear No. 1 LH seat belt fastened | 11 to 14 V |
| Rear No. 1 LH seat belt not fastened | Below 1 V | |||
| G304-4 (RRBT) - Body ground*2 | R - Body ground | Rear No. 2 RH seat belt buckle switch signal | Rear No. 2 RH seat belt fastened | 11 to 14 V |
| Rear No. 2 RH seat belt not fastened | Below 1 V | |||
| G304-19 (RLBT) - Body ground*2 | V - Body ground | Rear No. 2 LH seat belt buckle switch signal | Rear No. 2 LH seat belt fastened | 11 to 14 V |
| Rear No. 2 LH seat belt not fastened | Below 1 V |
*1: w/ Rear Seat Belt Warning
*2: w/ Rear No. 2 Seat Belt Warning
CHECK CENTER AIRBAG SENSOR ASSEMBLY
| Terminal No. | Symbol | Description |
|---|---|---|
| R1-11*1 | DBE+ | Front seat inner belt LH (Seat belt buckle switch LH) |
| R1-12*1 | DBE- | Front seat inner belt LH (Seat belt buckle switch LH) |
| Q25-11*2 | DBE+ | Front seat inner belt RH (Seat belt buckle switch RH) |
| Q25-12*2 | DBE- | Front seat inner belt RH (Seat belt buckle switch RH) |
*1: for LHD
*2: for RHD
| Terminal No. | Symbol | Description |
|---|---|---|
| R49-10*1 | LBE+ | Front seat inner belt LH (Seat belt buckle switch LH) |
| R49-18*1 | LBE- | Front seat inner belt LH (Seat belt buckle switch LH) |
| Q43-15*2 | RBE+ | Front seat inner belt RH (Seat belt buckle switch RH) |
| Q43-23*2 | RBE- | Front seat inner belt RH (Seat belt buckle switch RH) |
*1: for LHD
*2: for RHD
CHECK DRIVER SIDE JUNCTION BLOCK ASSEMBLY, MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
| *A | Main Body ECU (Multiplex Network Body ECU) with 3 connectors | *B | for LHD |
| *C | for RHD | - | - |
| *1 | Main Body ECU (Multiplex Network Body ECU) | - | - |
| *A | Main Body ECU (Multiplex Network Body ECU) with 2 connectors | *B | for LHD |
| *C | for RHD | - | - |
| *1 | Main Body ECU (Multiplex Network Body ECU) | - | - |
Remove the main body ECU (multiplex network body ECU) from the driver side junction block assembly.
Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>REMOVAL
Connect the driver side junction block assembly connectors.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| A-32 (IG) - Body ground | None - Body ground | Ignition power supply | Ignition switch ON | 11 to 14 V |
| Ignition switch off | Below 1 V | |||
| A-31 (BECU) - Body ground | None - Body ground | Battery power supply | Always | 11 to 14 V |
| A-30 (ACC) - Body ground | None - Body ground | ACC power supply | Ignition switch ACC | 11 to 14 V |
| Ignition switch off | Below 1 V | |||
| A-11 (GND1) - Body ground | None - Body ground | Ground | Always | Below 1 Ω |
Install the main body ECU (multiplex network body ECU).
Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>INSTALLATION
Measure the voltage and check for pulses according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
|
*1: for LHD *2: for RHD *3: w/ Rear Seat Belt Warning |
||||
| 2N-30 (RCTY) - Body ground*1, *3 | R - Body ground | Rear door courtesy light switch assembly RH signal | Rear door RH open | Below 1 V |
| Rear door RH closed | Pulse generation | |||
| 2P-23 (RCTY) - Body ground*2, *3 | R - Body ground | Rear door courtesy light switch assembly RH signal | Rear door RH open | Below 1 V |
| Rear door RH closed | Pulse generation | |||
| 2Q-33 (LCTY) - Body ground*1, *3 | V - Body ground | Rear door courtesy light switch assembly LH signal | Rear door LH open | Below 1 V |
| Rear door LH closed | Pulse generation | |||
| 2O-15 (LCTY) - Body ground*2, *3 | V - Body ground | Rear door courtesy light switch assembly LH signal | Rear door LH open | Below 1 V |
| Rear door LH closed | Pulse generation | |||