READ DATA LIST
Using the GTS to read the Data List allows values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body / (desired system) / Data List.
According to the display on the GTS, read the Data List.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| P-Seatbelt Buckle SW | Front passenger side seat belt buckle signal / ON or OFF | ON: Front passenger side seat belt fastened
OFF: Front passenger side seat belt unfastened |
- |
| Driver Side Seatbelt Warning Buzzer | Driver side seat belt warning buzzer signal / ON or OFF | ON: Seat belt warning buzzer enabled
OFF: Seat belt warning buzzer disabled |
The current customize setting is displayed. |
| P - Seatbelt Warning Buzzer | Front passenger side seat belt warning buzzer signal / ON or OFF | ON: Seat belt warning buzzer enabled
OFF: Seat belt warning buzzer disabled |
The current customize setting is displayed. |
| 2nd-Row Seatbelt Buckle (R) | Rear No. 1 RH seat belt buckle switch signal / ON or OFF | ON: Rear No. 1 RH seat belt not fastened
OFF: Rear No. 1 RH seat belt fastened |
w/ Rear Seat Belt Warning |
| 2nd-Row Seatbelt Buckle (L) | Rear No. 1 LH seat belt buckle switch signal / ON or OFF | ON: Rear No. 1 LH seat belt not fastened
OFF: Rear No. 1 LH seat belt fastened |
w/ Rear Seat Belt Warning |
| 2nd-Row Seatbelt Buckle (C) | Rear No. 1 center seat belt buckle switch signal / ON or OFF | ON: Rear No. 1 center seat belt not fastened
OFF: Rear No. 1 center seat belt fastened |
w/ Rear Seat Belt Warning |
| 3rd-Row Seatbelt Buckle (R) | Rear No. 2 RH seatbelt buckle switch signal / ON or OFF | ON: Rear No. 2 RH seat belt not fastened
OFF: Rear No. 2 RH seat belt fastened |
w/ Rear No. 2 Seat Belt Warning |
| 3rd-Row Seatbelt Buckle (L) | Rear No. 2 LH seatbelt buckle switch signal / ON or OFF | ON: Rear No. 2 LH seat belt not fastened
OFF: Rear No. 2 LH seat belt fastened |
w/ Rear No. 2 Seat Belt Warning |
| Rear Right Seatbelt Warning Buzzer Function | Function to sound the rear RH seat belt warning buzzer | ON: Seat belt warning buzzer enabled
OFF: Seat belt warning buzzer disabled |
w/ Rear Seat Belt Warning |
| Rear Left Seatbelt Warning Buzzer Function | Function to sound the rear LH seat belt warning buzzer | ON: Seat belt warning buzzer enabled
OFF: Seat belt warning buzzer disabled |
w/ Rear Seat Belt Warning |
| Rear Center Seatbelt Warning Buzzer Function | Function to sound the rear center seat belt warning buzzer | ON: Seat belt warning buzzer enabled
OFF: Seat belt warning buzzer disabled |
w/ Rear Seat Belt Warning |
| 3rd Right Seatbelt Warning Buzzer Function | Function to sound the rear No. 2 RH seat belt warning buzzer | ON: Seat belt warning buzzer enabled
OFF: Seat belt warning buzzer disabled |
w/ Rear No. 2 Seat Belt Warning |
| 3rd Left Seatbelt Warning Buzzer Function | Function to sound the rear No. 2 LH seat belt warning buzzer | ON: Seat belt warning buzzer enabled
OFF: Seat belt warning buzzer disabled |
w/ Rear No. 2 Seat Belt Warning |
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Left side Buckle SW*1 | Front LH side seat belt buckle switch / Unset, Set or NG | Unset: Seat belt unfastened
Set: Seat belt fastened NG: Condition undetermined |
- |
| Right side Buckle SW*2 | Front RH side seat belt buckle switch / Unset, Set or NG | Unset: Seat belt unfastened
Set: Seat belt fastened NG: Condition undetermined |
- |
| Driver Buckle SW*3 | Driver side seat belt buckle switch / Unset, Set or NG | Unset: Seat belt unfastened
Set: Seat belt fastened NG: Condition undetermined |
- |
*1: w/ Side Airbag for LHD
*2: w/ Side Airbag for RHD
*3: w/o Side Airbag
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| RR Door Courtesy SW | Rear door courtesy light switch RH / ON or OFF | ON: Rear door RH open
OFF: Rear door RH closed |
w/ Rear Seat Belt Warning |
| RL Door Courtesy SW | Rear door courtesy light switch LH / ON or OFF | ON: Rear door LH open
OFF: Rear door LH closed |
w/ Rear Seat Belt Warning |
PERFORM ACTIVE TEST
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body / Combination Meter / Active Test.
According to display on the GTS, perform the Active Test.
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Driver Side Seat Belt | Front seat belt warning light | ON/OFF | Confirm that the vehicle is stopped and the engine is idling. |
| Front Passenger Side Seat Belt | Front seat belt warning light | ON/OFF | Confirm that the vehicle is stopped and the engine is idling. |
The front seat belt warning light on the combination meter assembly is used for both the driver side seat and front passenger side seat.