Make sure to record any output Vehicle Control History codes before clearing them and checking the Vehicle Control History again.
CHECK VEHICLE CONTROL HISTORY
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Telematics / Utility / Vehicle Control History (RoB).
CLEAR VEHICLE CONTROL HISTORY
By performing this procedure, all stored Vehicle Control History will be cleared.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Telematics / Utility / Vehicle Control History (RoB).
According to the display on the GTS, clear the Vehicle Control History (RoB).