Each ECM terminal's standard voltage is shown in the table below.
In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".
Use the illustration above as a reference for the ECM terminals.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| G184-1 (BATT) - G185-5 (E1) | L - W-B | Battery (for measuring the battery voltage and for the ECM memory) | Always | 11 to 14 V |
| G185-18 (IGSW) - G185-5 (E1) | W - W-B | Engine switch | Engine switch on (IG) | 11 to 14 V |
| G184-4 (+B) - G185-5 (E1) | W - W-B | Power source of ECM | Engine switch on (IG) | 11 to 14 V |
| G184-3 (+B2) - G185-5 (E1) | W - W-B | Power source of ECM | Engine switch on (IG) | 11 to 14 V |
| G184-2 (+B3) - G185-5 (E1) | W - W-B | Power source of ECM | Engine switch on (IG) | 11 to 14 V |
| G184-14 (MREL) - G185-5 (E1) | V - W-B | EFI MAIN NO. 1 relay operation signal | Engine switch on (IG) | 0 to 1.5 V |
| 10 seconds elapsed after engine switch off | 11 to 14 V | |||
| G184-6 (+BD1) - G185-5 (E1) | B - W-B | EDU relay operation signal | Engine switch on (IG) | 11 to 14 V |
| G184-5 (+BD2) - G185-5 (E1) | B - W-B | EDU relay operation signal | Engine switch on (IG) | 11 to 14 V |
| G184-19 (GREL) - G185-5 (E1) | R - W-B | GLOW relay | Cranking | 0 to 1.5 V |
| Idling (10 seconds or more after engine start) | 11 to 14 V | |||
| G184-11 (NSW) - G185-5 (E1) | B - W-B | Park/Neutral position switch assembly signal*1 | Engine switch on (IG), shift lever not in P or N | 11 to 14 V |
| Engine switch on (IG), shift lever in P or N | Below 1.0 V | |||
| Clutch start switch assembly signal*2 | Engine switch on (IG), clutch pedal fully depressed | Below 1.0 V | ||
| Engine switch on (IG), clutch pedal released | 11 to 14 V | |||
| G185-29 (VCPA) - G185-22 (EPA) | LG - P | Power source of accelerator pedal position sensor (for VPA) | Engine switch on (IG) | 4.5 to 5.5 V |
| G185-30 (VCP2) - G185-25 (EPA2) | R - W | Power source of accelerator pedal position sensor (for VPA2) | Engine switch on (IG) | 4.5 to 5.5 V |
| G185-28 (VPA) - G185-22 (EPA) | L - P | Accelerator pedal position sensor signal (for engine control) | Engine switch on (IG), accelerator pedal fully released | 0.5 to 1.1 V |
| Accelerator pedal position sensor signal (for engine control) | Engine switch on (IG), accelerator pedal fully depressed | 3.0 to 4.6 V | ||
| G185-31 (VPA2) - G185-25 (EPA2) | GR - W | Accelerator pedal position sensor signal (for sensor malfunction detection) | Engine switch on (IG), accelerator pedal fully released | 0.9 to 2.3 V |
| Accelerator pedal position sensor signal (for sensor malfunction detection) | Engine switch on (IG), accelerator pedal fully depressed | 3.4 to 5.0 V | ||
| C150-30 (VCVG) - C150-29 (EVG) | R - G | Power source of mass air flow meter sub-assembly (for VG) | Engine switch on (IG) | 4.8 to 5.2 V |
| C150-31 (VG) - C150-29 (EVG) | W - G | Mass air flow meter sub-assembly signal | Idling | Pulse generation
(See waveform 1) |
| C150-28 (THA) - C150-29 (EVG) | Y - G | Intake air temperature sensor (built into mass air flow meter sub-assembly) | Idling, intake air temperature at 20°C (68°F) | 0.5 to 3.4 V |
| C149-26 (THIA) - C149-27 (E2) | B - BR | Intake air temperature sensor (turbo) | Idling, intake air temperature at 0 to 80°C (32 to 176°F) | 0.5 to 3.4 V |
| C149-32 (THCA) - C149-29(ETIW) | B - R | Intake air temperature sensor (for intercooler) | Idling, intake air temperature at 0 to 80°C (32 to 176°F) | 0.5 to 3.4 V |
| C149-34 (THW) - C149-27 (E2) | R - BR | Engine coolant temperature sensor | Idling, engine coolant temperature at 80°C (176°F) | 0.2 to 1.0 V |
| C149-30 (THIW) - C149-29(ETIW) | BR - R | Engine coolant temperature sensor (for intercooler) | Idling, engine coolant temperature at 80°C (176°F) | 0.2 to 1.0 V |
| G184-22 (STA) - G185-5 (E1) | W - W-B | Starter signal | Cranking | 6.0 V or higher |
| C149-6 (#1D+) - C149-7 (#1D-) | W - B | No. 1 Injector assembly signal | Idling | Pulse generation
(See waveform 2) |
| C149-1 (#2D+) - C149-2 (#2D-) | V - P | No. 2 Injector assembly signal | ||
| C150-7 (#3D+) - C150-6 (#3D-) | L - LG | No. 3 Injector assembly signal | ||
| C149-5 (#4D+) - C149-4 (#4D-) | G - L | No. 4 Injector assembly signal | ||
| C152-17 (VCG) - C152-18 (G2-) | B - W | Power source of camshaft position sensor (specific voltage) | Engine switch on (IG) | 4.5 to 5.5 V |
| C152-27 (G2+) - C152-18 (G2-) | G - W | Camshaft position sensor signal | Idling | Pulse generation
(See waveform 3) |
| C152-20 (VCNE) - C152-19 (NE-) | R - L | Power source of crankshaft position sensor (specific voltage) | Engine switch on (IG) | 4.5 to 5.5 V |
| C152-28 (NE+) - C152-19 (NE-) | LG - L | Crankshaft position sensor signal | Idling | Pulse generation
(See waveform 4) |
| G185-13 (STP) - G185-5 (E1) | V - W-B | Stop light switch assembly signal | Engine switch on (IG), brake pedal depressed | 7.5 to 14 V |
| Engine switch on (IG), brake pedal released | 0 to 1.5 V | |||
| G185-12 (ST1-) - G185-5 (E1) | B - W-B | Stop light switch assembly signal
(opposite to STP) |
Engine switch on (IG), brake pedal depressed | 0 to 1.5 V |
| Engine switch on (IG), brake pedal released | 7.5 to 14 V | |||
| G184-10 (SPD) - G185-5 (E1) | R - W-B | Speed signal from combination meter assembly | Engine switch on (IG), slowly wheel rotated | Pulse generation
(See waveform 5) |
| C149-28 (VCPM) - C149-19 (EPIM) | G - B | Power source of manifold absolute pressure sensor (specific voltage) | Engine switch on (IG) | 4.75 to 5.25 V |
| C149-18 (PIM) - C149-19 (EPIM) | L - B | Manifold absolute pressure sensor | Negative pressure of 40 kPa (300 mmHg, 11.8 in.Hg) applied | 0.1 to 0.7 V |
| Same as atmospheric pressure | 0.8 to 1.5 V | |||
| Positive pressure of 170 kPa (1275 mmHg, 50.2 in.Hg) applied | 1.6 to 2.3 V | |||
| C151-28 (VIJ1) - C151-19 (EIJ1) | B - W | Power source of fuel pressure sensor (No. 1 injector assembly) | Engine switch on (IG) | 4.5 to 5.5 V |
| C151-18 (PIJ1) - C151-19 (EIJ1) | R - W | Fuel pressure sensor (No. 1 injector assembly) | Engine warmed up, engine idling | 1.4 to 1.7 V |
| C152-24 (VIJ2) - C152-30 (EIJ2) | L - Y | Power source of fuel pressure sensor (No. 2 injector assembly) | Engine switch on (IG) | 4.5 to 5.5 V |
| C152-29 (PIJ2) - C152-30 (EIJ2) | G - Y | Fuel pressure sensor (No. 2 injector assembly) | Engine warmed up, engine idling | 1.4 to 1.7 V |
| C152-33 (VIJ3) - C152-32 (EIJ3) | B - W | Power source of fuel pressure sensor (No. 3 injector assembly) | Engine switch on (IG) | 4.5 to 5.5 V |
| C152-26 (PIJ3) - C152-32 (EIJ3) | R - W | Fuel pressure sensor (No. 3 injector assembly) | Engine warmed up, engine idling | 1.4 to 1.7 V |
| C152-22 (VIJ4) - C152-21 (EIJ4) | L - Y | Power source of fuel pressure sensor (No. 4 injector assembly) | Engine switch on (IG) | 4.5 to 5.5 V |
| C152-23 (PIJ4) - C152-21 (EIJ4) | G - Y | Fuel pressure sensor (No. 4 injector assembly) | Engine warmed up, engine idling | 1.4 to 1.7 V |
| C150-3 (PCV+) - C150-4 (PCV-) | W - B | Pre-stroke control valve operation signal | Idling | Pulse generation
(See waveform 6) |
| C150-2 (PRV+) - C150-1 (PRV-) | Y - G | Pressure discharge valve signal | Engine switch turned off after idling | Pulse generation |
| C151-1 (VNM+) - G185-5 (E1) | W - W-B | Variable vane DC motor signal (turbocharger nozzle vane control actuator) | Idling | Pulse generation |
| C151-2 (VNM-) - G185-5 (E1) | B - W-B | Variable vane DC motor signal (turbocharger nozzle vane control actuator) | Idling | Pulse generation |
| C151-30 (VNVC) - C151-22 (VNE2) | W - L | Power source of nozzle vane position sensor (turbocharger nozzle vane control actuator) | Engine switch on (IG) | 4.5 to 5.5 V |
| C151-23 (VNA) - C151-22 (VNE2) | R - L | Nozzle vane position sensor signal (turbocharger nozzle vane control actuator) | Engine switch on (IG) | 2.3 to 2.7 V |
| C151-29 (VCVL) - C151-20 (EVLU) | Y - G | Power source of throttle position sensor | Engine switch on (IG) | 4.5 to 5.5 V |
| C151-21 (VLU) - C151-20 (EVLU) | R - G | Throttle position sensor signal | Engine switch on (IG), throttle valve
fully opened |
3.6 to 4.2 V |
| Engine switch on (IG), throttle valve
fully closed |
0.4 to 1.0 V | |||
| C151-5 (M+) - G185-1 (ME01) | R - W-B | Diesel throttle duty signal | Engine warmed up, racing engine | Pulse generation |
| C151-4 (M-) - G185-1 (ME01) | L - W-B | Diesel throttle duty signal | Engine warmed up, racing engine | Pulse generation |
| C151-31 (VCEG) - C151-24 (EEGL) | Y - BR | Power source of EGR valve position sensor | Engine switch on (IG) | 4.5 to 5.5 V |
| C151-25 (EGRA) - C151-24 (EEGL) | R - BR | EGR valve position sensor | Engine switch on (IG) | 0.6 to 1.4 V |
| C151-6 (EGM+) - G185-5 (E1) | L - W-B | EGR valve duty signal | Engine warmed up, idling | Pulse generation |
| C151-7 (EGM-) - G185-5 (E1) | W - W-B | EGR valve duty signal | Engine warmed up, idling | Pulse generation |
| C149-16 (ECBV) - G185-5 (E1) | L - W-B | Vacuum switching valve assembly (for EGR bypass valve) | Vacuum switching valve assembly (for EGR bypass valve) on | 0 to 1.5 V |
| Vacuum switching valve assembly (for EGR bypass valve) off | 11 to 14 V | |||
| C151-32 (VCPX) - C151-26 (EPEX) | P - LG | Power source of differential pressure sensor | Engine switch on (IG) | 4.5 to 5.5 V |
| C151-27 (PEX) - C151-26 (EPEX) | L - LG | Differential pressure sensor | Engine switch on (IG) | 0.4 to 4.8 V |
| C152-1 (FIV+) - C151-3 (FIV-) | L - W | Exhaust fuel addition injector assembly signal | Exhaust fuel addition injector operating | Pulse generation |
| C149-23 (THTO) - C149-27 (E2) | R - BR | Exhaust gas temperature sensor | Engine warmed up, idling | 0.2 to 4.95 V |
| C149-25 (THCI) - C149-27 (E2) | G - BR | No. 2 exhaust gas temperature sensor | Engine warmed up, idling | 0.2 to 4.95 V |
| C149-33 (THCO) - C149-27 (E2) | B - BR | No. 3 exhaust gas temperature sensor | Engine warmed up, idling | 0.2 to 4.95 V |
| C149-24 (THSO) - C149-27 (E2) | P - BR | No. 4 Exhaust gas temperature sensor | Engine warmed up, idling | 0.2 to 4.95 V |
| C150-13 (EOPV) - G185-5 (E1) | G - W-B | Oil pressure switching valve | Idling | 0 to 1.5 V |
| C150-34 (VCPE) - C150-35 (EPEO) | B - G | Power source of oil pressure sensor | Engine switch on (IG) | 4.5 to 5.5 V |
| C150-26 (PEO) - C150-35 (EPEO) | Y - G | Oil pressure sensor | Engine warmed up, engine idling | 0.8 to 1.1 V |
| G184-23 (NEO) - G185-5 (E1) | P - W-B | Crankshaft position sensor signal sent to certification ECU (smart key ECU assembly) | Engine warmed up, idling | Pulse generation
(See waveform 7) |
| G185-15 (AC1) - G185-4 (E01) | LG - W-B | A/C signal | A/C switch on | 0 to 1.5 V |
| A/C switch off | 11 to 14 V | |||
| G185-14 (ACT) - G185-4 (E01) | R - W-B | A/C signal | Engine switch on (IG) | 11 to 14 V |
| A/C cut control on | 0 to 3 V | |||
| C150-15 (IWPO) - G185-5 (E1) | P - W-B | Electric water pump assembly signal | Electric water pump assembly operating | Pulse generation |
| C150-14 (IWPI) - G185-5 (E1) | R - W-B | Electric water pump assembly signal | Electric water pump assembly operating | Pulse generation |
| G184-28 (CANL) - G185-5 (E1) | W - W-B | CAN communication line | Engine switch on (IG) | Pulse generation
(See waveform 8) |
| G184-17 (CANH) - G185-5 (E1) | LG - W-B | CAN communication line | Engine switch on (IG) | Pulse generation
(See waveform 9) |
| G184-27 (CANU) - G185-5 (E1) | L - W-B | CAN communication line | Engine switch on (IG) | Pulse generation
(See waveform 9) |
| G184-35 (CAND) - G185-5 (E1) | W - W-B | CAN communication line | Engine switch on (IG) | Pulse generation
(See waveform 8) |
| C152-7 (LIN) - G185-5 (E1) | L - W-B | LIN communication line | Engine switch on (IG) | Pulse generation
(See waveform 10) |
| C149-17 (CINJ) - G185-5 (E1) | V - W-B | INJ communication line | Engine warmed up, idling | Pulse generation
(See waveform 11) |
| G185-4 (E01) - Body ground | W-B - Body ground | Ground circuit of ECM | Always | Below 1 Ω |
| G185-3 (E02) - Body ground | W-B - Body ground | Ground circuit of ECM | Always | Below 1 Ω |
| G185-5 (E1) - Body ground | W-B - Body ground | Ground circuit of ECM | Always | Below 1 Ω |
| G185-1 (ME01) - Body ground | W-B - Body ground | Ground circuit of ECM | Always | Below 1 Ω |
| G185-8 (EC) - Body ground | W-B - Body ground | Ground circuit of ECM | Always | Below 1 Ω |
| G185-7 (E1D1) - Body ground | W-B - Body ground | Ground circuit of ECM | Always | Below 1 Ω |
| G185-6 (E1D2) - Body ground | W-B - Body ground | Ground circuit of ECM | Always | Below 1 Ω |
| G185-2 (E04) - Body ground | W-B - Body ground | Ground circuit of ECM | Always | Below 1 Ω |
*1: for Automatic Transmission
*2: for Manual transmission
WAVEFORM 1
| ECM Terminal Name | Between VG and EVG |
| Tester Range | 1 V/DIV., 100 μsec./DIV. |
| Condition | Engine switch on (IG) |
WAVEFORM 2
| ECM Terminal Name | Between #1D+ and #1D-
Between #2D+ and #2D- Between #3D+ and #3D- Between #4D+ and #4D- |
| Tester Range | 10 V/DIV., 1 msec./DIV. |
| Condition | Idling with warm engine |
The waveform varies depending on the injector injection.
WAVEFORM 3
| ECM Terminal Name | Between G2+ and G2- |
| Tester Range | 5 V/DIV., 20 msec./DIV. |
| Condition | Idling with warm engine |
The waveform varies depending on the engine speed.
WAVEFORM 4
| ECM Terminal Name | Between NE+ and NE- |
| Tester Range | 2 V/DIV., 10 msec./DIV. |
| Condition | Idling with warm engine |
The wavelength becomes shorter as the engine speed.
WAVEFORM 5
| ECM Terminal Name | Between SPD and E1 |
| Tester Range | 5 V/DIV., 10 msec./DIV. |
| Condition | Driving at vehicle speed of 40 km/h (25 mph) |
The wavelength becomes shorter as the vehicle speed increases.
WAVEFORM 6
| ECM Terminal Name | Between PCV+ and PCV- |
| Tester Range | 10 V/DIV., 20 msec./DIV. |
| Condition | Idling with warm engine |
The waveform varies depending on pre-stroke control valve operation.
WAVEFORM 7
| ECM Terminal Name | Between NEO and E1 |
| Tester Range | 1 V/DIV., 2 msec./DIV. |
| Condition | Idling with warm engine |
WAVEFORM 8
| ECM Terminal Name | Between CANL and E1
Between CAND and E1 |
| Tester Range | 1 V/DIV., 10 msec./DIV. |
| Condition | Engine stopped, Engine switch on (IG) |
The waveform varies depending on the CAN communication signal.
WAVEFORM 9
| ECM Terminal Name | Between CANH and E1
Between CANU and E1 |
| Tester Range | 1 V/DIV., 10 msec./DIV. |
| Condition | Engine stopped, Engine switch on (IG) |
The waveform varies depending on the CAN communication signal.
WAVEFORM 10
| ECM Terminal Name | Between LIN and E1 |
| Tester Range | 2 V/DIV., 10 msec./DIV. |
| Condition | Engine stopped, Engine switch on (IG) |
The waveform varies depending on the LIN communication signal.
WAVEFORM 11
| ECM Terminal Name | Between CINJ and E1 |
| Tester Range | 2 V/DIV., 10 msec./DIV. |
| Condition | Idling with warm engine |
The waveform is output every 250 msec.