Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
73380C
1.INSTALL REAR SEAT INNER BELT ASSEMBLY
Install the inner belt with the nut.
w/ Seat Belt Warning System:
Attach the clamp.
2.INSTALL SEAT CUSHION COVER WITH PAD (w/ Seat Belt Warning System)
72615A
3.INSTALL REAR SEATBACK LOCK STRIKER COVER RH (w/ Seat Belt Warning System)
71829B
4.INSTALL REAR SEAT REAR CUSHION MOULDING LH (w/ Seat Belt Warning System)
71825B
5.INSTALL REAR SEAT CUSHION MOULDING RH (w/ Seat Belt Warning System)
72525B
6.INSTALL RECLINING ADJUSTER RELEASE HANDLE RH (w/ Seat Belt Warning System)
71845A
7.INSTALL REAR SEAT UPPER RECLINING COVER RH (w/ Seat Belt Warning System)
8.INSTALL REAR SEAT ASSEMBLY RH
Install the rear seat assembly RH (See page Vehicle Interior>SEAT>REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Slide Walk-in Seat Type RH Side)>INSTALLATION).
9.CHECK SEAT BELT WARNING SYSTEM (w/ Seat Belt Warning System)