Home › Vehicle Interior › SEAT BELT › REAR CENTER SEAT INNER BELT ASSEMBLY (for 60/40 Split Double-folding Seat Type RH Side) › from 2021.06
RM27T0E _58 Vehicle Interior _053738 SEAT BELT _0261159 REAR CENTER SEAT INNER BELT ASSEMBLY(for 60/40 Split Double-folding Seat Type RH Side) G

SEAT BELT  REAR CENTER SEAT INNER BELT ASSEMBLY(for 60/40 Split Double-folding Seat Type RH Side)  INSPECTION  


PROCEDURE

Hide 73460C 1.INSPECT REAR CENTER SEAT INNER BELT ASSEMBLY

a.
B613940C04
0.104,0.104 0.417,0.26 0.313,0.156 10 false *a
*a Component without harness connected
(Rear Center Seat Inner Belt Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
4 - 5 Seat belt unfastened Below 1 Ω
Seat belt fastened 1 MΩ or higher


If the result is not as specified, replace the rear center seat inner belt assembly.