Home › Vehicle Interior › SEAT BELT › REAR CENTER SEAT INNER BELT ASSEMBLY (for 60/40 Split Tumble Seat Type LH Side) › from 2021.06
RM27T0E _58 Vehicle Interior _053738 SEAT BELT _0261160 REAR CENTER SEAT INNER BELT ASSEMBLY(for 60/40 Split Tumble Seat Type LH Side) G

SEAT BELT  REAR CENTER SEAT INNER BELT ASSEMBLY(for 60/40 Split Tumble Seat Type LH Side)  INSPECTION  


PROCEDURE

Hide 73380C 1.INSPECT REAR NO. 1 SEAT INNER BELT ASSEMBLY RH

a.
B610973C05
0.094,0.083 0.406,0.281 0.313,0.198 10 false *a
*a Component without harness connected
(Rear No. 1 Seat Inner Belt Assembly RH)
- -


i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 4 Seat belt unfastened Below 1 Ω
Seat belt fastened 1 MΩ or higher


If the result is not as specified, replace the rear No. 1 seat inner belt assembly RH.