Home › Vehicle Interior › SEAT BELT › REAR CENTER SEAT INNER BELT ASSEMBLY (for 60/40 Split Slide Walk-in Seat Type RH Side) › from 2021.06
RM27T0E _58 Vehicle Interior _053738 SEAT BELT _0261161 REAR CENTER SEAT INNER BELT ASSEMBLY(for 60/40 Split Slide Walk-in Seat Type RH Side) G

SEAT BELT  REAR CENTER SEAT INNER BELT ASSEMBLY(for 60/40 Split Slide Walk-in Seat Type RH Side)  INSPECTION  


PROCEDURE

Hide 73390A 1.INSPECT REAR SEAT INNER BELT ASSEMBLY (for LHD)

a.
B583934C07
0.917,1.667 1.167,1.667 1.167,1.667 1.448,1.354 true 1.76,1.375 2.333,1.667 2.333,1.667 2.583,1.667 true 0.073,0.083 0.385,0.24 0.313,0.156 10 false *a 0.573,1.573 1.188,1.823 0.615,0.25 10 false CBR- 2.604,1.573 3.188,1.823 0.583,0.25 10 false CBR+
*a Component without harness connected
(Rear Seat Inner Belt Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (CBR-) - 3 (CBR+) Seat belt unfastened Below 1 Ω
Seat belt fastened 1 MΩ or higher


If the result is not as specified, replace the rear seat inner belt assembly.


Hide 73390A 2.INSPECT REAR SEAT INNER BELT ASSEMBLY (for RHD)

a.
B583934C08
1.771,1.375 2.167,1.583 2.167,1.583 2.583,1.583 true 0.833,1.583 1.333,1.583 1.333,1.583 1.51,1.365 true 0.073,0.083 0.385,0.24 0.313,0.156 10 false *a 0.49,1.5 1.104,1.698 0.615,0.198 10 false CBR- 2.604,1.49 3.219,1.688 0.615,0.198 10 false CBR+
*a Component without harness connected
(Rear Seat Inner Belt Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (CBR-) - 3 (CBR+) Seat belt unfastened Below 1 Ω
Seat belt fastened 1 MΩ or higher


If the result is not as specified, replace the rear seat inner belt assembly.