Pressing Power Switch does not Turn on System
Circuit diagnosis · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
INSPECTION PROCEDURE
| 1. CHECK VEHICLE CONDITION |
 |
Check that conditions in the cabin are not likely to cause condensation.
- HINT:
- This problem occurs if the cabin is humid and the temperature changes rapidly. This may produce condensation, resulting in a short circuit.
- OK:
- Condensation is not likely being produced.
|
NG |
 |
|
| DRY OUT CABIN AND RECHECK CONDITION |
|
|
| OK |
|
 |
|
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
|
|