2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

Cursor or Map Rotates when Vehicle Stopped

Circuit diagnosis · Vehicles built from Jan 2012

INSPECTION PROCEDURE


1. CHECK CONDITION

  1. E106418
    Check with the customer if the vehicle has been turned by a turntable.

    OK:
    Vehicle has not been turned by a turntable.

    HINT:
    If the vehicle is turned on a turntable with the engine switch on (IG), the system may store the angular velocity. As a result, the vehicle position cursor may deviate. In this case, the vehicle position cursor will return to normal by turning the engine switch off and back to on (IG) again with the vehicle completely stopped.



NG
TURN ENGINE SWITCH ON (IG) WHEN VEHICLE IS COMPLETELY STOPPED
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)


← Screen Flicker or Color Distortion (from Jan 2012)GPS Mark is not Displayed (from Jan 2012) →