2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

INSPECTION

Inspection · Vehicles built from Jan 2012


INSPECT AIR FUEL RATIO SENSOR

  1. A226559E01
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance (for Bank 1):
    Tester Connection
    Condition
    Specified Condition
    1 (HA1A) - 2 (+B)
    20°C (68°F)
    1.6 to 3.2 Ω
    1 (HA1A) - 4 (A1A-)
    Always
    10 kΩ or higher

    Standard Resistance (for Bank 2):
    Tester Connection
    Condition
    Specified Condition
    1 (HA2A) - 2 (+B)
    20°C (68°F)
    1.6 to 3.2 Ω
    1 (HA2A) - 4 (A2A-)
    Always
    10 kΩ or higher

    Text in Illustration 
    *A
    for Bank 1
    *B
    for Bank 2
    *a
    Component without harness connected
    (Air Fuel Ratio Sensor)
    If the result is not as specified, replace the air fuel ratio sensor.

← REMOVAL (from Jan 2012)INSTALLATION (from Jan 2012) →