2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

DISASSEMBLY

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. REMOVE INTAKE VALVE

  1. A221102E01
    Using SST, compress the inner compression spring and remove the valve spring retainer locks.
    SST
    09202-70020   (09202-00010)

  1. Remove the valve spring retainer, inner compression spring and intake valve.

    HINT:
    Arrange the removed parts in the correct order.


2. REMOVE EXHAUST VALVE

  1. A221103E01
    Using SST, compress the inner compression spring and remove the valve spring retainer locks.
    SST
    09202-70020   (09202-00010)

  1. Remove the valve spring retainer, inner compression spring and exhaust valve.

    HINT:
    Arrange the removed parts in the correct order.


3. REMOVE VALVE STEM OIL SEAL

  1. A221104
    Using needle-nose pliers, remove the valve stem oil seals.


4. REMOVE VALVE SPRING SEAT

  1. A221105
    Using compressed air and a magnet hand, remove the valve spring seats by blowing air onto them.


5. REMOVE NO. 1 STRAIGHT SCREW PLUG

NOTICE:
If coolant leaks from a straight screw plug or a plug is corroded, replace it.

  1. A221106E04
    Using a 10 mm hexagon wrench, remove the 4 No. 1 straight screw plugs and 4 gaskets.
    Text in Illustration 
    *a
    RH
    *b
    LH


6. REMOVE NO. 2 STRAIGHT SCREW PLUG

NOTICE:
If coolant leaks from a straight screw plug or a plug is corroded, replace it.

  1. A221107E04
    Using a 14 mm hexagon wrench, remove the 2 No. 2 straight screw plugs and 2 gaskets.
    Text in Illustration 
    *a
    RH
    *b
    LH


7. REMOVE STUD BOLT

NOTICE:
If a stud bolt is deformed or its threads are damaged, replace it.


8. REMOVE UNION

NOTICE:
If a union is deformed, replace it.

← DISASSEMBLY (Sep 2011 – Dec 2011)INSPECTION (Sep 2011 – Dec 2011) →