2011-2013 Land Cruiser · Service Manual Vehicle Interior

SYSTEM DESCRIPTION

Troubleshooting · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


FUNCTION OF MAIN COMPONENT
Components
Function
Multiplex network master switch
The door control switch on the master switch locks/unlocks all doors.
Door courtesy light switch
Turns on when the door is open and off when the door is closed. Outputs the door status (open or closed) to the main body ECU.
Driver side door lock
  1. The built-in motor locks/unlocks the door.
  2. The built-in door control switch position (key-linked) detects the door key cylinder status (locked or unlocked) and outputs the data to the main body ECU.
  3. The built-in position switch detects the door status (locked or unlocked) and outputs the data to the main body ECU. This switch turns off when the door is locked and on when the door is unlocked.
Front passenger side door lock
Rear door lock LH
Rear door lock RH
Back door lock
  1. The built-in motor locks/unlocks the door.
  2. The built-in position switch detects the door status (locked or unlocked) and outputs the data to the main body ECU. This switch turns off when the door is locked and on when the door is unlocked.

SYSTEM DESCRIPTION
  1. The power door lock system locks/unlocks all doors.

    1. The door control switch of the master switch uses the LIN line to send lock/unlock request signals to the main body ECU.
    2. The driver door key cylinder lock/unlock request signals are sent to the main body ECU from the driver side door lock.
    3. The main body ECU receives the request signals and locks/unlocks each door.
    The door control system has the following functions:
    Function
    Outline
    Manual lock and unlock function
    Locks/unlocks all doors by the door control switch lock operation (manual operation).
    Key-linked lock and unlock function
    Linked with the door key cylinder.
    Locks/unlocks all doors when the lock/unlock operation is possible.
    Key lock-in prevention function
    When the door control transmitter is in the vehicle, performing the door lock operation with the lock switch on the outer handle will not lock the door and will sound a buzzer.
    Manual unlock prohibition function
    When the doors are locked using the transmitter or key with the ignition switch ON and the driver side seat belt fastened, unlock operations using the door control switches are prohibited.
    2-step unlock function
    Unlocks only the driver side door by turning the key cylinder once and unlocks the other doors by turning it twice.

    HINT:
    This function is OFF by default.

    Double locking function*
    Prevents the doors from being unlocked through the operation of the inside door knobs and also from the outside of the vehicle.
    1. *: w/ Double Locking Function

← SYSTEM DIAGRAM (from Jan 2012)SYSTEM DESCRIPTION (from Jan 2012) →