INSTALLATION
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
- HINT:
- Use the same procedures for LHD and RHD vehicles.
- The procedures listed below are for LHD vehicles.
- Use the same procedures for LHD and RHD vehicles.
| 1. INSTALL NAVIGATION ANTENNA ASSEMBLY |
![]() ![]() |
Install the antenna with the 2 screws.
Attach the 2 clamps.
| 2. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY |
Install the instrument panel safety pad (Click here).
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 4. CHECK SRS WARNING LIGHT |
Check the SRS warning light (Click here).


