REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
- HINT:
- Use the same procedures for LHD and RHD vehicles.
- The procedures listed below are for LHD vehicles.
- Use the same procedures for LHD and RHD vehicles.
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY |
Remove the instrument panel safety pad (Click here).
| 3. REMOVE NAVIGATION ANTENNA ASSEMBLY |
![]() ![]() |
Detach the 2 clamps.
Remove the 2 screws and antenna.


